Topcom 510, 500, 520 manual Display, General Remarks, 1st Line, 2nd Line, Connection

HL_DM5201_GB.qxd 16-04-2003 13:24 Page 7

Deskmaster

Fr.	03 Jan 99 00:39
ISDN	￿￿

2 DISPLAY

1st Line

•In idle state, date and time will be displayed.

•During a connection, the number of the called party will be displayed.

•In case of a function selection, the main menu will be displayed.

2nd Line

•When programming, the selected function will be displayed. The function offered can be selected using the OK key. Additional submenus will be indicated by an arrow in the right corner of the line. Use the arrow keys assigned to the display to go to the right submenu.

•During a connection, the call charges will be shown in the right part of the display line, if available on your ISDN line.

•An up-arrow sign (￿) at the right side of the display line is the symbol for an activated So bus. This could be the analog port, the V.24 port or any other terminal connected to the So Bus being activated.

•The floppy disk sign ( ￿) at the right side of the display is the symbol for an activated B-channel for data via the V.24 interface.

3GENERAL REMARKS

This handbook contains the necessary information for the operation of 3 types of ISDN telephones, all belonging to the Deskmaster family:

•Deskmaster 500i: Basic phone (without local interface ports);

•Deskmaster 510i: Phone with data port (V.24);

•Deskmaster 520i: Phone with data port and analog port (external adaptor included).

Information related to a particular version is indicated in the text, where applicable.

3.1 Connection

You connect the phone by plugging the connector of the phone line cord into one of the wall outlets of your ISDN access (S0 Bus).

1Mains Inlet (Deskmaster 520i only)

2Analog extensions, AB port (Deskmaster 520i only)

3 V.24 port, PC COM port

4 ISDN line port

		V 24	ISDN
1	2	3	4

7