Schlage SRP-275 Safety Precautions, Do not plug several products in one multi-outlet

Page 2

SRP-275

Safety Precautions

In using the present appliance, please keep the following safety regulations in order to prevent any hazard or material damage.

WARNING

Violating following instructions can cause serious injury or death.

Do not plug several products in one multi-outlet.

This can provoke over-heating and a fire.

If the plug is wet or dirty, dry or wipe it before usage.

If the plug does not fit perfectly with the outlet, do not plug in.

Be sure to use only standardized multi-outlets.

PROHIBIT

You must use only the supplied adapter.

It is dangerous to use other adapters.

ONLY SUPPLIED ADAPTER

PROHIBIT

Do not pull the cable to unplug.

This can damage the cable, which is the origin of a fire or a breakdown of the printer.

Keep the plastic bag out of children’s reach.

If not, a child may put the bag on his head.

PROHIBIT

 

PROHIBIT

Do not plug in or unplug with your hands wet.

You can be electrocuted.

Do not bend the cable by force or leave it under any heavy object.

A damaged cable can cause a fire.

PROHIBIT

PROHIBIT

Rev. 1.01

- 2 -

Image 2
Contents SRP-275 SRP-275 Safety Precautions Do not plug several products in one multi-outletSRP-275 To UnplugSRP-275 Waste Electrical and Electric Equipment Weee SRP-275 EMC and Safety standards AppliedCE Marking Label MaterialRear view SRP-275 IntroductionFront view SRP-275 Table of Contents Choosing a place for the printer SRP-275 Setting Up the PrinterUnpacking Error LED Red Color Using the operation panelControl panel Power LED Green Color Paper OUT LED Red ColorConnecting the Interface cable and Drawer kick-out cable SRP-275 Connecting the cablesConnecting the AC Adaptor Connect the AC adapter according to the following procedureSerial Interface RS-232C Interface connectorConnector Drawer kick-outPin no Source Compatibility mode Nibble mode Byte mode Parallel Interface IEEE1284Drawer kick-out USB InterfaceEthernet Interface Pin No Description DirectionDIP Switch setting for EpsonESC/POS mode SRP-275 Setting the SwitchesSetting the DIP Switch DIP Switch setting for CitizeniDP 3550 mode International Character Selection DSW Code CountryDIP Switch setting for StarSP500 mode Emulation Selection DSW 1-1Changing the DIP Switch setting Memory Switch Function Setting the Memory SwitchesMemory Switch setting for EpsonESC/POS mode OffCustomize value Function Selectable value Serial communication Function Selectable valueMemory Switch Setup Mode Example of Memory Switch setup sheetProcedure of Memory Switch setting Function Class Memory Switch setting for Star modeSettings Default Settings Function Memory Switch Bit DbcsMemory Switch Bit Function MSW 2-ACharacter Table *2 Memory Switch Bit Function Reserved SRP-275 Ribbon Cassette Installation SRP-275 Roll Paper Installation SRP-275 Changing the paper width SRP-275 Installing the wall mount Option SRP-275 Self Test Hexadecimal dump To use the hexadecimal dump feature, follow these stepsSRP-275 Hexadecimal Dumping Paper specifications SpecificationPrinting specification Ribbon cassette specificationEnvironment conditions Electrical characteristicsReliability Dimensions Dimensions & weightOptional features WeightRecoverable errors SRP-275 Appendix TroubleshootingError LED blinking pattern Error Description Error LED blinking pattern RecoveryPrinter does not start printing If any of the lights are on, please check the followingPrinting is poor Printer stops printingYou want to check the operation of the printer by itself Self test