Schlage SRP-275 user manual To Unplug

Page 3

SRP-275

CAUTION

Violating following instructions can cause slight wound or damage the appliance.

If you observe a strange smoke, odor or noise from the printer, unplug it before taking following measures.

•Switch off the printer and unplug the set from the mains.

•After the disappearance of the smoke, call your dealer to repair it.

TO UNPLUG

PRINTER

Install the printer on the stable surface.

•If the printer falls down, it can be broken and you can hurt yourself.

Keep the desiccant out of children’s reach.

•If not, they may eat it.

PROHIBIT

Use only approved accessories and do not try to disassemble, repair or remodel it for yourself.

•Call your dealer when you need these services.

•Do not touch the blade of auto cutter.

	PRINTER	DISASSEMBLING
		PROHIBITED
PROHIBIT		PROHIBITED	PRINTER
PROHIBIT			PRINTER

Do not let water or other foreign objects in the printer.

•If this happened, switch off and unplug the printer before calling your dealer.

Do not use the printer when it is out of order. This can cause a fire or an electrocution.

•Switch off and unplug the printer before calling your dealer.

PROHIBIT	PRINTER	TO UNPLUG
	PRINTER

PRINTER

DEALER

Rev. 1.01

- 3 -

Image 3

Contents SRP-275 Do not plug several products in one multi-outlet SRP-275 Safety PrecautionsTo Unplug SRP-275SRP-275 Label Material SRP-275 EMC and Safety standards AppliedCE Marking Waste Electrical and Electric Equipment WeeeSRP-275 Introduction Front viewRear view SRP-275 Table of Contents SRP-275 Setting Up the Printer UnpackingChoosing a place for the printer Paper OUT LED Red Color Using the operation panelControl panel Power LED Green Color Error LED Red ColorConnect the AC adapter according to the following procedure SRP-275 Connecting the cablesConnecting the AC Adaptor Connecting the Interface cable and Drawer kick-out cableDrawer kick-out Interface connectorConnector Serial Interface RS-232CParallel Interface IEEE1284 Pin no Source Compatibility mode Nibble mode Byte modePin No Description Direction USB InterfaceEthernet Interface Drawer kick-outSRP-275 Setting the Switches Setting the DIP SwitchDIP Switch setting for EpsonESC/POS mode International Character Selection DSW Code Country DIP Switch setting for CitizeniDP 3550 modeEmulation Selection DSW 1-1 DIP Switch setting for StarSP500 modeChanging the DIP Switch setting Off Setting the Memory SwitchesMemory Switch setting for EpsonESC/POS mode Memory Switch FunctionSerial communication Function Selectable value Customize value Function Selectable valueExample of Memory Switch setup sheet Memory Switch Setup ModeProcedure of Memory Switch setting Memory Switch setting for Star mode SettingsFunction Class Default Settings Dbcs Function Memory Switch BitMSW 2-A Memory Switch Bit FunctionCharacter Table *2 Memory Switch Bit Function Reserved SRP-275 Ribbon Cassette Installation SRP-275 Roll Paper Installation SRP-275 Changing the paper width SRP-275 Installing the wall mount Option SRP-275 Self Test To use the hexadecimal dump feature, follow these steps SRP-275 Hexadecimal DumpingHexadecimal dump Ribbon cassette specification SpecificationPrinting specification Paper specificationsElectrical characteristics ReliabilityEnvironment conditions Weight Dimensions & weightOptional features DimensionsError Description Error LED blinking pattern Recovery SRP-275 Appendix TroubleshootingError LED blinking pattern Recoverable errorsIf any of the lights are on, please check the following Printer does not start printingSelf test Printer stops printingYou want to check the operation of the printer by itself Printing is poor