Schlage SRP-275 user manual Electrical characteristics, Reliability, Environment conditions

Page 35

			SRP-275
10-4 Electrical characteristics

Item		Description		Remark
Supply voltage		24V DC ± 10%
Current consumption	Operating	Mean : Approximately 0.5A
(at 24V, except for drawer		Peak : Approximately 1.5A
kick-out driving)	Standby	Mean: Approximately 0.3A

NOTES

Maximum 1A for drawer kick-out driving.

10-5 Reliability

Item	Description	Remark
	Mechanism : Approx. 10 million lines
Life firing frequency	Auto cutter : Approx. 1 million cuts
Life firing frequency	(End of life is defined as the point at which the printer
	(End of life is defined as the point at which the printer
	reaches the beginning of the Wear out Period.)
Head	Approx. 300 million dots/wire

10-6 Environment conditions

Item		Description	Remark
Temperature	Operating : 0~50℃ (32~122℉)
	Storage : -10~50℃	(14~122℉)

Relative humidity	Operating : 10~90% RH (Non-condensing)
	Storage : 10~90% RH (Non-condensing)

Rev. 1.01

- 35 -

Image 35

Contents SRP-275 Do not plug several products in one multi-outlet SRP-275 Safety PrecautionsTo Unplug SRP-275SRP-275 Label Material SRP-275 EMC and Safety standards AppliedCE Marking Waste Electrical and Electric Equipment WeeeRear view SRP-275 IntroductionFront view SRP-275 Table of Contents Choosing a place for the printer SRP-275 Setting Up the PrinterUnpacking Paper OUT LED Red Color Using the operation panelControl panel Power LED Green Color Error LED Red ColorConnect the AC adapter according to the following procedure SRP-275 Connecting the cablesConnecting the AC Adaptor Connecting the Interface cable and Drawer kick-out cableDrawer kick-out Interface connectorConnector Serial Interface RS-232CParallel Interface IEEE1284 Pin no Source Compatibility mode Nibble mode Byte modePin No Description Direction USB InterfaceEthernet Interface Drawer kick-outDIP Switch setting for EpsonESC/POS mode SRP-275 Setting the SwitchesSetting the DIP Switch International Character Selection DSW Code Country DIP Switch setting for CitizeniDP 3550 modeEmulation Selection DSW 1-1 DIP Switch setting for StarSP500 modeChanging the DIP Switch setting Off Setting the Memory SwitchesMemory Switch setting for EpsonESC/POS mode Memory Switch FunctionSerial communication Function Selectable value Customize value Function Selectable valueExample of Memory Switch setup sheet Memory Switch Setup ModeProcedure of Memory Switch setting Function Class Memory Switch setting for Star modeSettings Default Settings Dbcs Function Memory Switch BitMSW 2-A Memory Switch Bit FunctionCharacter Table *2 Memory Switch Bit Function Reserved SRP-275 Ribbon Cassette Installation SRP-275 Roll Paper Installation SRP-275 Changing the paper width SRP-275 Installing the wall mount Option SRP-275 Self Test Hexadecimal dump To use the hexadecimal dump feature, follow these stepsSRP-275 Hexadecimal Dumping Ribbon cassette specification SpecificationPrinting specification Paper specificationsEnvironment conditions Electrical characteristicsReliability Weight Dimensions & weightOptional features DimensionsError Description Error LED blinking pattern Recovery SRP-275 Appendix TroubleshootingError LED blinking pattern Recoverable errorsIf any of the lights are on, please check the following Printer does not start printingSelf test Printer stops printingYou want to check the operation of the printer by itself Printing is poor