Savin 3370, 3355 operating instructions

Page 2

Introduction

This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum versatility from this machine all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine.

Please read the Safety Information before using this machine. It contains important information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Notes

Some illustrations may be slightly different from your machine.

Certain options may not be available in some countries. For details, please contact your local dealer.

Operator Safety

This machine is considered a CDRH class 1 laser device, safe for office/EDP use. The machine con- tains two GaAIAs laser diodes, 5-milliwatt, 760-800 nanometer wavelength for each emitter. Direct (or indirect reflected ) eye contact with the laser beam might cause serious eye damage. Safety precau- tions and interlock mechanisms have been designed to prevent any possible laser beam exposure to the operator.

Laser Safety:

The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optical unit in the field. The optical housing unit can only be repaired in a factory or at a location with the requisite equipment. The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser chassis is not repairable in the field. Customer engineers are therefore directed to return all chassis and laser subsystems to the factory or service depot when replacement or the optical subsystem is re- quired.

Warning:

Use of controls or adjustment or performance of procedures other than those specified in this manual might result in hazardous radiation exposure.

Notes:

The model names of the machines do not appear in the following pages. Check the type of your ma- chine before reading this manual. (For details, see P.1 “Machine Types” .)

Type1: 2055DP, 3355

Type2: 2070DP, 3370

Certain types might not be available in some countries. For details, please contact your local dealer.

Two kinds of size notation are employed in this manual. With this machine refer to the inch version.

For good copy quality, Savin recommends that you use genuine toner.

Savin shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts in your office product.

Power Source

120V, 60Hz, 20A or more

Please be sure to connect the power cord to a power source as above. For details about power source, see P.335 “Power Connection” .

Read this manual carefully before you use this product and keep it handy for future reference.

For safety, please follow the instructions in this manual.

Image 2
Contents 3355/3370 Page Means Power on Means Stand by Safety Information Safety During OperationPage How to Read this Manual SymbolsTable of Contents Sort/Stack/Staple Job PresetPreset Reduce/Enlarge Punch Copying from the Bypass TraySeries/Book 137 Combination Chart 206Features and Benefits 210 Cover/Slip Sheet 151Printing Saved Documents 216 What is Connect Copy? 223 How Connect Copy Works 225Connect Copy Display Panel 227 Using Connect Copy 230 Deleting Saved Documents 220Changing the Paper Size 282 Accessing the User Tools Copy/Document Server Features 305Dos And Donts 333 Where to Put Your Machine 334 Adding Staples 285Specification 354Page Machine Types What You Can Do with This Machine Copy Mode Page Guide To Components Bypass tray ADF trayConnect Copy port To copy onto OHP transparencies and translucent paper Output Tray GuideTo copy onto normal paper and thick paper Ventilation holeLarge Capacity Tray LCT OptionsSheet Finisher Booklet FinisherControl Panel IndicatorsMain power indicator Screen Contrast knobStart key Function indicatorsFunction Status indicator Number keysInitial copy display Display PanelDisplays and Key Operations Function menu Document Server initial display Function List Based on Options Duplex Combine Option *3 Page Operation switch right side of the control panel Turning On the PowerTurning On the Main Power Main power switch left side of the machineShutting Down the Machine Turning Off the Main PowerStarting the Machine Inch version OriginalsMetric version Non-recommended originals for the document feederSizes Detectable by the Auto Paper Select Exposure glass Missing Image AreaSizes difficult to detect Document feeder Copy Paper Recommended Paper Sizes and TypesB5KL, A5KL Non-recommended Paper Paper Storage Used Toner TonerToner Storage Basics Make sure that there are no previous settings remaining Basic ProcedureMake sure that the machine is in Copy mode Set your originalsAuto Reset Press the Start keyLift the document feeder Setting OriginalsSetting Originals on the Exposure Glass Setting Originals in the Document Feeder Lower the document feederTurn Original OrientationStandard Orientation Select the original orientation Make sure that the Standard Orientation key is selectedPress the 90 Turn key Press the OK key Setting Special Originals Batch Sadf modeMixed Sizes mode X14 11X17 Thin mode Press the Thin key Press the OK keyAdjusting Copy Image Density Basic FunctionsSelect one of Image Density modes Make sure that the Auto Image Density key is selectedSelecting Original Type Setting Manual Paper Select Selecting Copy PaperAuto Paper Select Press the appropriate key to select the original typeWhere Original Is Set Paper Size and Direction Select the copy paper Make sure that the Auto Paper Select key is selectedRotated copy Where Original Is Set Original Size and Direction Auto Reduce/EnlargeTab sheet tray Copying onto Tab StockSelect the paper tray Preparation Set originals Place the tab stocks in tray Make copies Pull out tray 2 until it stopsAdjust the back fence as follows Select the paper tray tray Place your originals as followsStack optional finisher required Sort/Stack/StapleSort Staple optional finisher requiredMaximum tray capacity is as follows Inch version Sort Rotate Sort Enter the number of copy sets with the number keys Set the original, then press the Start key StackStack After all originals are scanned, press the #keySheet Finisher Booklet Finisher Staple 16KKL Except Stapling position and original setting Sheet /100-Sheet FinisherMetric version Inch version 2 × Stitch Select one of the stapling positions Press the Resume key to resume scanning Press the Cancel keyTo Stop Scanning Temporarily When Memory Reaches 0% To Remove the Paper from the Staple Unit