Savin 3355, 3370 operating instructions Setting Special Originals, Batch Sadf mode

Page 49

Copying

Setting Special Originals

Use this function when you want to use Batch (SADF), Mixed Sizes, Thin mode, or when you select the original orientation.

		Batch (SADF) mode
2		Up to 100 standard originals can be set in the document feeder at a time. If there
		are more than 100 originals, set Batch (SADF) mode so that originals can be fed
		automatically without pressing the {Start}key each time they are set in the doc-
		ument feeder.

Important

❒When setting special originals such as translucent paper, set them one by one.

Note

❒In Batch (SADF) mode, even when one original is set in the document feeder, the original is automatically fed each time it is set.

APress the [Special Original] key.

BPress the [Batch (SADF)] key.

CPress the [OK] key.

DSet your originals, then press the {Start} key.

The Auto Feed indicator of the document feeder goes on.

36

Image 49

Contents 3355/3370 Page Means Power on Means Stand by Safety During Operation Safety InformationPage Symbols How to Read this ManualTable of Contents Preset Reduce/Enlarge Job PresetSort/Stack/Staple Punch Copying from the Bypass TrayFeatures and Benefits 210 Combination Chart 206Series/Book 137 Cover/Slip Sheet 151Connect Copy Display Panel 227 Using Connect Copy 230 What is Connect Copy? 223 How Connect Copy Works 225Printing Saved Documents 216 Deleting Saved Documents 220Dos And Donts 333 Where to Put Your Machine 334 Accessing the User Tools Copy/Document Server Features 305Changing the Paper Size 282 Adding Staples 285354 SpecificationPage Machine Types What You Can Do with This Machine Copy Mode Page Guide To Components Connect Copy port ADF trayBypass tray To copy onto normal paper and thick paper Output Tray GuideTo copy onto OHP transparencies and translucent paper Ventilation holeSheet Finisher OptionsLarge Capacity Tray LCT Booklet FinisherMain power indicator IndicatorsControl Panel Screen Contrast knobFunction Status indicator Function indicatorsStart key Number keysDisplays and Key Operations Display PanelInitial copy display Function menu Document Server initial display Function List Based on Options Duplex Combine Option *3 Page Turning On the Main Power Turning On the PowerOperation switch right side of the control panel Main power switch left side of the machineStarting the Machine Turning Off the Main PowerShutting Down the Machine Metric version OriginalsInch version Non-recommended originals for the document feederSizes Detectable by the Auto Paper Select Sizes difficult to detect Missing Image AreaExposure glass Document feeder Recommended Paper Sizes and Types Copy PaperB5KL, A5KL Non-recommended Paper Paper Storage Toner Storage TonerUsed Toner Basics Make sure that the machine is in Copy mode Basic ProcedureMake sure that there are no previous settings remaining Set your originalsPress the Start key Auto ResetSetting Originals on the Exposure Glass Setting OriginalsLift the document feeder Lower the document feeder Setting Originals in the Document FeederStandard Orientation Original OrientationTurn Make sure that the Standard Orientation key is selected Select the original orientationPress the 90 Turn key Press the OK key Batch Sadf mode Setting Special OriginalsMixed Sizes mode X14 11X17 Press the Thin key Press the OK key Thin modeBasic Functions Adjusting Copy Image DensityMake sure that the Auto Image Density key is selected Select one of Image Density modesSelecting Original Type Setting Auto Paper Select Selecting Copy PaperManual Paper Select Press the appropriate key to select the original typeWhere Original Is Set Paper Size and Direction Make sure that the Auto Paper Select key is selected Select the copy paperRotated copy Auto Reduce/Enlarge Where Original Is Set Original Size and DirectionSelect the paper tray Copying onto Tab StockTab sheet tray Preparation Pull out tray 2 until it stops Set originals Place the tab stocks in tray Make copiesSelect the paper tray tray Place your originals as follows Adjust the back fence as followsSort Sort/Stack/StapleStack optional finisher required Staple optional finisher requiredMaximum tray capacity is as follows Inch version Sort Rotate Sort Enter the number of copy sets with the number keys Stack StackSet the original, then press the Start key After all originals are scanned, press the #keySheet Finisher Booklet Finisher Staple 16KKL Except Sheet /100-Sheet Finisher Stapling position and original settingMetric version Inch version 2 × Stitch Select one of the stapling positions To Stop Scanning Temporarily Press the Cancel keyPress the Resume key to resume scanning To Remove the Paper from the Staple Unit When Memory Reaches 0%