Savin 3355, 3370 operating instructions Paper Storage

Page 39

Basics

Note

❒Do not use the following kinds of paper or a misfeed might occur.

•Bent, folded, or creased paper

1• Torn paper

•Slippery paper

•Perforated paper

•Rough paper

•Thin paper that has low stiffness

•Paper with much paper dust on its surface

❒If you make a copy on rough grain paper, the copy image might be blurred.

❒Do not use paper which has been copied or printed on.

Paper Storage

Note

❒When storing paper, the following precautions should always be followed:

•Do not store paper where it will be exposed to direct sunlight.

•Avoid storing paper in humid areas (humidity: 70% or less).

•Store on a flat surface.

❒Keep open reams of papers in the package, and store as you would unopened paper.

❒Under high temperature and high humidity, or low temperature and low hu- midity conditions, store paper in a vinyl bag.

26

Image 39

Contents 3355/3370 Page Means Power on Means Stand by Safety During Operation Safety InformationPage Symbols How to Read this ManualTable of Contents Punch Copying from the Bypass Tray Job PresetPreset Reduce/Enlarge Sort/Stack/StapleCover/Slip Sheet 151 Combination Chart 206Features and Benefits 210 Series/Book 137Deleting Saved Documents 220 What is Connect Copy? 223 How Connect Copy Works 225Connect Copy Display Panel 227 Using Connect Copy 230 Printing Saved Documents 216Adding Staples 285 Accessing the User Tools Copy/Document Server Features 305Dos And Donts 333 Where to Put Your Machine 334 Changing the Paper Size 282354 SpecificationPage Machine Types What You Can Do with This Machine Copy Mode Page Guide To Components ADF tray Connect Copy portBypass tray Ventilation hole Output Tray GuideTo copy onto normal paper and thick paper To copy onto OHP transparencies and translucent paperBooklet Finisher OptionsSheet Finisher Large Capacity Tray LCTScreen Contrast knob IndicatorsMain power indicator Control PanelNumber keys Function indicatorsFunction Status indicator Start keyDisplay Panel Displays and Key OperationsInitial copy display Function menu Document Server initial display Function List Based on Options Duplex Combine Option *3 Page Main power switch left side of the machine Turning On the PowerTurning On the Main Power Operation switch right side of the control panelTurning Off the Main Power Starting the MachineShutting Down the Machine Non-recommended originals for the document feeder OriginalsMetric version Inch versionSizes Detectable by the Auto Paper Select Missing Image Area Sizes difficult to detectExposure glass Document feeder Recommended Paper Sizes and Types Copy PaperB5KL, A5KL Non-recommended Paper Paper Storage Toner Toner StorageUsed Toner Basics Set your originals Basic ProcedureMake sure that the machine is in Copy mode Make sure that there are no previous settings remainingPress the Start key Auto ResetSetting Originals Setting Originals on the Exposure GlassLift the document feeder Lower the document feeder Setting Originals in the Document FeederOriginal Orientation Standard OrientationTurn Make sure that the Standard Orientation key is selected Select the original orientationPress the 90 Turn key Press the OK key Batch Sadf mode Setting Special OriginalsMixed Sizes mode X14 11X17 Press the Thin key Press the OK key Thin modeBasic Functions Adjusting Copy Image DensityMake sure that the Auto Image Density key is selected Select one of Image Density modesSelecting Original Type Setting Press the appropriate key to select the original type Selecting Copy PaperAuto Paper Select Manual Paper SelectWhere Original Is Set Paper Size and Direction Make sure that the Auto Paper Select key is selected Select the copy paperRotated copy Auto Reduce/Enlarge Where Original Is Set Original Size and DirectionCopying onto Tab Stock Select the paper trayTab sheet tray Preparation Pull out tray 2 until it stops Set originals Place the tab stocks in tray Make copiesSelect the paper tray tray Place your originals as follows Adjust the back fence as followsStaple optional finisher required Sort/Stack/StapleSort Stack optional finisher requiredMaximum tray capacity is as follows Inch version Sort Rotate Sort Enter the number of copy sets with the number keys After all originals are scanned, press the #key StackStack Set the original, then press the Start keySheet Finisher Booklet Finisher Staple 16KKL Except Sheet /100-Sheet Finisher Stapling position and original settingMetric version Inch version 2 × Stitch Select one of the stapling positions Press the Cancel key To Stop Scanning TemporarilyPress the Resume key to resume scanning To Remove the Paper from the Staple Unit When Memory Reaches 0%