Savin 3355, 3370 operating instructions

Page 5

RCAUTION:

•Protect the equipment from dampness or wet weather, such as rain, snow, and so on.

•Unplug the power cord from the wall outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment.

•When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).

•Do not allow paper clips, staples, or other small metallic objects to fall inside the equipment.

•Keep toner (used or unused) and toner bottle out of the reach of children.

•For environmental reasons, do not dispose of the equipment or expended supply waste at household waste collection points. Disposal can take place at an authorized dealer or at appropriate collection sites.

•The inside of the machine could be very hot. Do not touch the parts with a label indicating the “hot surface”. Otherwise it could cause a personal burn.

•Our products are engineered to meet high standards of quality and function- ality, and we recommend that you only use the expendable supplies avail- able at an authorized dealer.

ii

Image 5

Contents 3355/3370 Page Means Power on Means Stand by Safety During Operation Safety InformationPage Symbols How to Read this ManualTable of Contents Preset Reduce/Enlarge Job PresetSort/Stack/Staple Punch Copying from the Bypass TrayFeatures and Benefits 210 Combination Chart 206Series/Book 137 Cover/Slip Sheet 151Connect Copy Display Panel 227 Using Connect Copy 230 What is Connect Copy? 223 How Connect Copy Works 225Printing Saved Documents 216 Deleting Saved Documents 220Dos And Donts 333 Where to Put Your Machine 334 Accessing the User Tools Copy/Document Server Features 305Changing the Paper Size 282 Adding Staples 285354 SpecificationPage Machine Types What You Can Do with This Machine Copy Mode Page Guide To Components Bypass tray ADF trayConnect Copy port To copy onto normal paper and thick paper Output Tray GuideTo copy onto OHP transparencies and translucent paper Ventilation holeSheet Finisher OptionsLarge Capacity Tray LCT Booklet FinisherMain power indicator IndicatorsControl Panel Screen Contrast knobFunction Status indicator Function indicatorsStart key Number keysInitial copy display Display PanelDisplays and Key Operations Function menu Document Server initial display Function List Based on Options Duplex Combine Option *3 Page Turning On the Main Power Turning On the PowerOperation switch right side of the control panel Main power switch left side of the machineShutting Down the Machine Turning Off the Main PowerStarting the Machine Metric version OriginalsInch version Non-recommended originals for the document feederSizes Detectable by the Auto Paper Select Exposure glass Missing Image AreaSizes difficult to detect Document feeder Recommended Paper Sizes and Types Copy PaperB5KL, A5KL Non-recommended Paper Paper Storage Used Toner TonerToner Storage Basics Make sure that the machine is in Copy mode Basic ProcedureMake sure that there are no previous settings remaining Set your originalsPress the Start key Auto ResetLift the document feeder Setting OriginalsSetting Originals on the Exposure Glass Lower the document feeder Setting Originals in the Document FeederTurn Original OrientationStandard Orientation Make sure that the Standard Orientation key is selected Select the original orientationPress the 90 Turn key Press the OK key Batch Sadf mode Setting Special OriginalsMixed Sizes mode X14 11X17 Press the Thin key Press the OK key Thin modeBasic Functions Adjusting Copy Image DensityMake sure that the Auto Image Density key is selected Select one of Image Density modesSelecting Original Type Setting Auto Paper Select Selecting Copy PaperManual Paper Select Press the appropriate key to select the original typeWhere Original Is Set Paper Size and Direction Make sure that the Auto Paper Select key is selected Select the copy paperRotated copy Auto Reduce/Enlarge Where Original Is Set Original Size and DirectionTab sheet tray Copying onto Tab StockSelect the paper tray Preparation Pull out tray 2 until it stops Set originals Place the tab stocks in tray Make copiesSelect the paper tray tray Place your originals as follows Adjust the back fence as followsSort Sort/Stack/StapleStack optional finisher required Staple optional finisher requiredMaximum tray capacity is as follows Inch version Sort Rotate Sort Enter the number of copy sets with the number keys Stack StackSet the original, then press the Start key After all originals are scanned, press the #keySheet Finisher Booklet Finisher Staple 16KKL Except Sheet /100-Sheet Finisher Stapling position and original settingMetric version Inch version 2 × Stitch Select one of the stapling positions Press the Resume key to resume scanning Press the Cancel keyTo Stop Scanning Temporarily To Remove the Paper from the Staple Unit When Memory Reaches 0%