Savin 3355, 3370 Display Panel, Displays and Key Operations, Initial copy display

Page 23

Display Panel

The display panel shows the status of the machine, error messages and function menus.

Important

❒Do not apply a strong shock or force of about 30 N (about 3 kgf) or more to the display panel. Otherwise, the display might be damaged.

Note

❒The function items displayed serve as selector keys. You can select or specify an item by lightly pressing it.

❒When you select or specify an item on the display panel, it is highlighted like

.

❒Keys appearing as

OK

cannot be used.

Displays and Key Operations

Note

❒The following illustrations are examples for the machine with the optional 50- sheet finisher and large capacity tray (LCT) installed.

❖Initial copy display

2

3

4

5

6

1

7

8

9

1.Original mode, Image Density and Special Original mode.

2.Operational status or messages.

3.The currently selected function (Copy, Document Server).

4.You can register up to three fre- quently used reduce/enlarge ratios

other than the fixed reduce/enlarge ratios. See “Shortcut R/E” in ⇒ P.315 “Reproduction Ratio 1/2”.

10

ZBQS050N

5.Job ID of the scanned document.

6.The number of originals scanned into memory, number of copies set, and number of copies made.

7.Sort, Stack, Staple or Punch mode.

8.Displays the contents of the Shortcut keys. You can register fre-

quently used functions in these keys. See “Shortcut Keys” in ⇒

P.314 “General Features 3/3”.

Image 23

Contents 3355/3370 Page Means Power on Means Stand by Safety During Operation Safety InformationPage Symbols How to Read this ManualTable of Contents Punch Copying from the Bypass Tray Job PresetPreset Reduce/Enlarge Sort/Stack/StapleCover/Slip Sheet 151 Combination Chart 206Features and Benefits 210 Series/Book 137Deleting Saved Documents 220 What is Connect Copy? 223 How Connect Copy Works 225Connect Copy Display Panel 227 Using Connect Copy 230 Printing Saved Documents 216Adding Staples 285 Accessing the User Tools Copy/Document Server Features 305Dos And Donts 333 Where to Put Your Machine 334 Changing the Paper Size 282354 SpecificationPage Machine Types What You Can Do with This Machine Copy Mode Page Guide To Components Bypass tray ADF trayConnect Copy port Ventilation hole Output Tray GuideTo copy onto normal paper and thick paper To copy onto OHP transparencies and translucent paperBooklet Finisher OptionsSheet Finisher Large Capacity Tray LCTScreen Contrast knob IndicatorsMain power indicator Control PanelNumber keys Function indicatorsFunction Status indicator Start keyInitial copy display Display PanelDisplays and Key Operations Function menu Document Server initial display Function List Based on Options Duplex Combine Option *3 Page Main power switch left side of the machine Turning On the PowerTurning On the Main Power Operation switch right side of the control panelShutting Down the Machine Turning Off the Main PowerStarting the Machine Non-recommended originals for the document feeder OriginalsMetric version Inch versionSizes Detectable by the Auto Paper Select Exposure glass Missing Image AreaSizes difficult to detect Document feeder Recommended Paper Sizes and Types Copy PaperB5KL, A5KL Non-recommended Paper Paper Storage Used Toner TonerToner Storage Basics Set your originals Basic ProcedureMake sure that the machine is in Copy mode Make sure that there are no previous settings remainingPress the Start key Auto ResetLift the document feeder Setting OriginalsSetting Originals on the Exposure Glass Lower the document feeder Setting Originals in the Document FeederTurn Original OrientationStandard Orientation Make sure that the Standard Orientation key is selected Select the original orientationPress the 90 Turn key Press the OK key Batch Sadf mode Setting Special OriginalsMixed Sizes mode X14 11X17 Press the Thin key Press the OK key Thin modeBasic Functions Adjusting Copy Image DensityMake sure that the Auto Image Density key is selected Select one of Image Density modesSelecting Original Type Setting Press the appropriate key to select the original type Selecting Copy PaperAuto Paper Select Manual Paper SelectWhere Original Is Set Paper Size and Direction Make sure that the Auto Paper Select key is selected Select the copy paperRotated copy Auto Reduce/Enlarge Where Original Is Set Original Size and DirectionTab sheet tray Copying onto Tab StockSelect the paper tray Preparation Pull out tray 2 until it stops Set originals Place the tab stocks in tray Make copiesSelect the paper tray tray Place your originals as follows Adjust the back fence as followsStaple optional finisher required Sort/Stack/StapleSort Stack optional finisher requiredMaximum tray capacity is as follows Inch version Sort Rotate Sort Enter the number of copy sets with the number keys After all originals are scanned, press the #key StackStack Set the original, then press the Start keySheet Finisher Booklet Finisher Staple 16KKL Except Sheet /100-Sheet Finisher Stapling position and original settingMetric version Inch version 2 × Stitch Select one of the stapling positions Press the Resume key to resume scanning Press the Cancel keyTo Stop Scanning Temporarily To Remove the Paper from the Staple Unit When Memory Reaches 0%