Savin 3355, 3370 operating instructions Basic Functions, Adjusting Copy Image Density

Page 53

Copying

Basic Functions

The following basic functions are explained in this section.

❖Adjusting Copy Image Density

Auto and Manual Image Density

2	❖ Selecting Original Type Setting

Text, Text·Photo, Photo, Pale, Generation Copy

❖Selecting Copy Paper

Auto Paper Select and Manual Paper Select

❖Auto Reduce/Enlarge

The machine can choose an appropriate reproduction ratio based on the pa- per and original sizes you select.

Note

❒You can select functions to be activated when Auto Reset is turned on, when Energy Saver is turned off, or after the machine is powered on. See ⇒ P.310 “General Features 1/3”.

❒You can change default settings for basic functions. See ⇒ P.310 “Settings You Can Change with the User Tools”.

Adjusting Copy Image Density

You can adjust the copy image density to match your originals.

There are three types in this function:

❖Auto Image Density

The machine automatically adjusts the image density.

❖Manual Image Density

If you require darker or lighter copies, adjust the image density yourself.

❖Combined Auto and Manual Image Density

Use when copying originals with a dirty background (such as newspapers). You can adjust the foreground density while leaving the background un- changed.

40

Image 53

Contents 3355/3370 Page Means Power on Means Stand by Safety During Operation Safety InformationPage Symbols How to Read this ManualTable of Contents Preset Reduce/Enlarge Job PresetSort/Stack/Staple Punch Copying from the Bypass TrayFeatures and Benefits 210 Combination Chart 206Series/Book 137 Cover/Slip Sheet 151Connect Copy Display Panel 227 Using Connect Copy 230 What is Connect Copy? 223 How Connect Copy Works 225Printing Saved Documents 216 Deleting Saved Documents 220Dos And Donts 333 Where to Put Your Machine 334 Accessing the User Tools Copy/Document Server Features 305Changing the Paper Size 282 Adding Staples 285354 SpecificationPage Machine Types What You Can Do with This Machine Copy Mode Page Guide To Components Bypass tray ADF trayConnect Copy port To copy onto normal paper and thick paper Output Tray GuideTo copy onto OHP transparencies and translucent paper Ventilation holeSheet Finisher OptionsLarge Capacity Tray LCT Booklet FinisherMain power indicator IndicatorsControl Panel Screen Contrast knobFunction Status indicator Function indicatorsStart key Number keysInitial copy display Display PanelDisplays and Key Operations Function menu Document Server initial display Function List Based on Options Duplex Combine Option *3 Page Turning On the Main Power Turning On the PowerOperation switch right side of the control panel Main power switch left side of the machineShutting Down the Machine Turning Off the Main PowerStarting the Machine Metric version OriginalsInch version Non-recommended originals for the document feederSizes Detectable by the Auto Paper Select Exposure glass Missing Image AreaSizes difficult to detect Document feeder Recommended Paper Sizes and Types Copy PaperB5KL, A5KL Non-recommended Paper Paper Storage Used Toner TonerToner Storage Basics Make sure that the machine is in Copy mode Basic ProcedureMake sure that there are no previous settings remaining Set your originalsPress the Start key Auto ResetLift the document feeder Setting OriginalsSetting Originals on the Exposure Glass Lower the document feeder Setting Originals in the Document FeederTurn Original OrientationStandard Orientation Make sure that the Standard Orientation key is selected Select the original orientationPress the 90 Turn key Press the OK key Batch Sadf mode Setting Special OriginalsMixed Sizes mode X14 11X17 Press the Thin key Press the OK key Thin modeBasic Functions Adjusting Copy Image DensityMake sure that the Auto Image Density key is selected Select one of Image Density modesSelecting Original Type Setting Auto Paper Select Selecting Copy PaperManual Paper Select Press the appropriate key to select the original typeWhere Original Is Set Paper Size and Direction Make sure that the Auto Paper Select key is selected Select the copy paperRotated copy Auto Reduce/Enlarge Where Original Is Set Original Size and DirectionTab sheet tray Copying onto Tab StockSelect the paper tray Preparation Pull out tray 2 until it stops Set originals Place the tab stocks in tray Make copiesSelect the paper tray tray Place your originals as follows Adjust the back fence as followsSort Sort/Stack/StapleStack optional finisher required Staple optional finisher requiredMaximum tray capacity is as follows Inch version Sort Rotate Sort Enter the number of copy sets with the number keys Stack StackSet the original, then press the Start key After all originals are scanned, press the #keySheet Finisher Booklet Finisher Staple 16KKL Except Sheet /100-Sheet Finisher Stapling position and original settingMetric version Inch version 2 × Stitch Select one of the stapling positions Press the Resume key to resume scanning Press the Cancel keyTo Stop Scanning Temporarily To Remove the Paper from the Staple Unit When Memory Reaches 0%