Savin 3370, 3355 operating instructions Original Orientation, Standard Orientation, Turn

Setting Originals

ASet the aligned originals face up into the document feeder. Setting a stack of originals is completed when the bottom plate rises.

2

TSPH040E

Important

❒After the bottom plate of the document feeder rises, do not add or force in originals.

Note

❒Straighten curls in the originals before setting them in the document feed- er.

❒To avoid a multi-sheet feed, shuffle the originals before setting them in the document feeder.

❒You can set the timing for the bottom plate of the document feeder to rise. See “ARDF Original Table Rise Time” in ⇒ P.329 “Input/Output”.

Original Orientation

You can set the original orientation separately in the following ways.

This function is useful for copying torn originals or large originals.

❖Standard Orientation

Select this function when the original direction is the same as the copy paper direction.

❖90° Turn

This function rotates the copy image by 90°.

Use this function when you want to copy onto A3, B4, 11" × 17" paper.

APress the [Special Original] key.

33