Savin 3355, 3370 operating instructions Auto Reset, Press the Start key

Page 43

Copying

Note

❒The maximum copy quantity can be set between 1 and 999 (default: 999). See “Maximum Copy Quantity” in ⇒ P.313 “General Features 2/3”.

❒To change the number entered, press the {Clear/Stop} key and enter the new number.

GPress the {Start} key.

2	The machine starts copying.

Note

❒When you set originals on the exposure glass, press the {#} key after all originals are scanned.

❒Usually, when you set a single original on the exposure glass or in the doc- ument feeder, the copied paper is delivered face up. However, with some functions, copies will be delivered face down.

❒You can choose to have copies delivered either face up or face down (ex-

cept for copying through the bypass tray). See “Face-Up/Down Selection in Platen Mode” in ⇒ P.329 “Input/Output”.

❒To stop the machine during the multi-copy run, press the {Clear/Stop}key.

❒To return the machine to the initial condition after copying, press the {Clear Modes/Energy Saver}key.

-Auto Reset

The machine returns to its initial condition automatically when your job is fin- ished, after a certain period of time. This function is called “Auto Reset”.

Note

❒You can change the Auto Reset time. See “Auto Reset Timer” in ⇒ P.310 “General Features 1/3”.

-Auto Off

The machine turns itself off automatically after your job is finished, after a cer- tain period of time. This function is called “Auto Off”.

Note

❒You can change the Auto Off time. See “Auto Off Timer” in the System Set- tings manual.

30

Image 43

Contents 3355/3370 Page Means Power on Means Stand by Safety During Operation Safety InformationPage Symbols How to Read this ManualTable of Contents Punch Copying from the Bypass Tray Job PresetPreset Reduce/Enlarge Sort/Stack/StapleCover/Slip Sheet 151 Combination Chart 206Features and Benefits 210 Series/Book 137Deleting Saved Documents 220 What is Connect Copy? 223 How Connect Copy Works 225Connect Copy Display Panel 227 Using Connect Copy 230 Printing Saved Documents 216Adding Staples 285 Accessing the User Tools Copy/Document Server Features 305Dos And Donts 333 Where to Put Your Machine 334 Changing the Paper Size 282354 SpecificationPage Machine Types What You Can Do with This Machine Copy Mode Page Guide To Components Connect Copy port ADF trayBypass tray Ventilation hole Output Tray GuideTo copy onto normal paper and thick paper To copy onto OHP transparencies and translucent paperBooklet Finisher OptionsSheet Finisher Large Capacity Tray LCTScreen Contrast knob IndicatorsMain power indicator Control PanelNumber keys Function indicatorsFunction Status indicator Start keyDisplays and Key Operations Display PanelInitial copy display Function menu Document Server initial display Function List Based on Options Duplex Combine Option *3 Page Main power switch left side of the machine Turning On the PowerTurning On the Main Power Operation switch right side of the control panelStarting the Machine Turning Off the Main PowerShutting Down the Machine Non-recommended originals for the document feeder OriginalsMetric version Inch versionSizes Detectable by the Auto Paper Select Sizes difficult to detect Missing Image AreaExposure glass Document feeder Recommended Paper Sizes and Types Copy PaperB5KL, A5KL Non-recommended Paper Paper Storage Toner Storage TonerUsed Toner Basics Set your originals Basic ProcedureMake sure that the machine is in Copy mode Make sure that there are no previous settings remainingPress the Start key Auto ResetSetting Originals on the Exposure Glass Setting OriginalsLift the document feeder Lower the document feeder Setting Originals in the Document FeederStandard Orientation Original OrientationTurn Make sure that the Standard Orientation key is selected Select the original orientationPress the 90 Turn key Press the OK key Batch Sadf mode Setting Special OriginalsMixed Sizes mode X14 11X17 Press the Thin key Press the OK key Thin modeBasic Functions Adjusting Copy Image DensityMake sure that the Auto Image Density key is selected Select one of Image Density modesSelecting Original Type Setting Press the appropriate key to select the original type Selecting Copy PaperAuto Paper Select Manual Paper SelectWhere Original Is Set Paper Size and Direction Make sure that the Auto Paper Select key is selected Select the copy paperRotated copy Auto Reduce/Enlarge Where Original Is Set Original Size and DirectionSelect the paper tray Copying onto Tab StockTab sheet tray Preparation Pull out tray 2 until it stops Set originals Place the tab stocks in tray Make copiesSelect the paper tray tray Place your originals as follows Adjust the back fence as followsStaple optional finisher required Sort/Stack/StapleSort Stack optional finisher requiredMaximum tray capacity is as follows Inch version Sort Rotate Sort Enter the number of copy sets with the number keys After all originals are scanned, press the #key StackStack Set the original, then press the Start keySheet Finisher Booklet Finisher Staple 16KKL Except Sheet /100-Sheet Finisher Stapling position and original settingMetric version Inch version 2 × Stitch Select one of the stapling positions To Stop Scanning Temporarily Press the Cancel keyPress the Resume key to resume scanning To Remove the Paper from the Staple Unit When Memory Reaches 0%