TERMINAL SETUP
Install/Replace MSAM Cards
3Remove the MSAM compartment door screw and rotate the door up and back to access the MSAM cardholders (see Figure 11).
MSAM COMPARTMENT
DOOR
MSAM COMPARTMENT
DOOR SCREW
Figure 11 Opening MSAM Compartment Door
4Remove any previously installed MSAM card by sliding the card from the MSAM cardholder.
5Install an MSAM card by aligning the card and carefully sliding it within the guides on the cover until it is fully inserted (see Figure 12).
Figure 12 Installing an MSAM Card
NOTE Before inserting the MSAM card, position it as shown in Figure 12, with the card’s gold contacts facing the smart car reader end of the terminal. The cardholder connector base has a set of contacts and a notch on one corner to ensure the MSAM card is positioned correctly. The MSAM card has a notch on one corner to ensure that it fits into the connector base in only one way. The MSAM compartment door will not close properly if the MSAM cards are installed incorrectly.
20VX5XX/VX6XX INSTALLATION GUIDE