VeriFone Vx510 manual Connecting the Check Reader to, Vx5xx Example PINpad Serial Port Connections

Page 22

TERMINAL SETUP

Connect Optional Device(s)

2Insert the larger RJ45-type connector on the other end of the PINpad cable into the PINpad serial port on the bottom of the terminal.

Figure 14 Vx5xx Example PINpad Serial Port Connections

Connecting the Check Reader to the Vx5xx

The Vx5xx terminal supports the CR 600 and CR 1000i check readers. Contact your VeriFone representative or visit the online store at www.store.verifone.com for information on these devices. Figure 15 provides an example of a peripheral connection to the RS-232 port.

CAUTION Check readers require a separate power source. Before connecting a check reader or similar device, remove the power cord from the bottom of the terminal and ensure that the green indicator LED is not lit.

Figure 15 Vx5xx Example Check Reader Connection

22VX5XX/VX6XX INSTALLATION GUIDE

Image 22

Contents

Omni 5xxx and Vx5xx/Vx6xx Omni 5xxx and Vx5xx/Vx6xx Installation Guide VeriFone, Inc Contents VeriFone Service SpecificationsMaintenance TroubleshootingAudience OrganizationDocumentation documents Document ConventionsAcronym Definitions Related Documentation Chapter Terminal OverviewFeatures and Benefits Wireless ConnectivitySelect Terminal Location FactorsUnpack Shipping Carton Electrical ConsiderationsFeatures 12-key,telephone-style keypadVx6xx Connection Ports Side and Bottom View Vx5xx Connection Ports Bottom View Establish Telephone Line Connections Vx6xx Direct Telephone ConnectionOpening the Printer Cover Removing Partial Paper Roll Install/Replace Msam Cards MSAMsOpening Msam Compartment Door Connecting the PINpad or Smart Card Reader to Connect Optional DevicesConnecting the Check Reader to Vx5xx Example PINpad Serial Port ConnectionsVx6xx Example PINpad Serial Port Connections Vx6xx Example Check Reader Connection Connect Terminal Power Pack To ConnectSmart Battery Install the Smart Battery Install/Replace SIM Card GSM/GPRS Models Loosen Retaining ScrewRemove GSM/GPRS Sled Module Replace GSM/GPRS Module Align Antenna with Antenna Port Tighten Antenna Barrel Nut Reader Use WirelessTransactions Smart Card TransactionUsing the Magnetic Card Reader Power DC Power Pack External DimensionsGSM/GPRS Terminal Clean the TerminalSmart Card Reader Smart Card Reader VeriFone Service and Support Return a Terminal or Smart Battery for ServiceAccessories Documentation Power Pack Thermal Printer PaperSwivel Stand Documentation Accessories and Documentation Does not Show Terminal DoesNot Start InfoTerminal Does Not Dial Out Will Not ChargePrinter Does Not Print Keypad Does Not Respond Peripheral Device Does Not WorkPrinter Paper Jam Transactions Fail To ProcessCheck the Smart Card Reader Index Connecting 23 smart card writers connecting Index Omni 5xxx and Vx5xx/Vx6xx