Uniden BCT-8 manual Typical Mounting Methods, Mounting the Scanner in Your Vehicle

Page 15

Typical Mounting Methods

The BCT8 can be conveniently mounted on a table, bulkhead, overhead, or any other desired location with the supplied mounting bracket (MB008) (refer to figure below for typical mounting methods).

Caution: Make sure there are no hidden electrical wires or other items behind the desired location before proceeding. Check that free access for mounting and cabling

is available.

• Table top mount

• Bulkhead mount

• Overhead mount

Mounting the Scanner in Your Vehicle

Before you mount the scanner, make sure you have all the necessary materials. Then confirm that the scanner fits your vehicle’s mounting area. This unit requires a mounting area of 2.44 inch high by 7.06 inch wide by 6.10 inch deep (50.8 x 176.5 x 152.5 mm).

Caution: Be sure to avoid obstructions behind the mounting surface.

Follow these steps to mount the scanner in your vehicle.

1.Choose a mounting location, then use the supplied mounting bracket as a template to mark the positions for

the mounting screw holes.

2. In the marked positions, drill holes slightly smaller than the supplied screws.

3. Attach the mounting bracket to the mounting location using the supplied screws and lock washers.

4. Attach the scanner to the mounting bracket using the

SQL

supplied mounting knobs.

VOL

5.Connect the antenna’s cable to the ANT. connector on the rear of the scanner.

Note: If the antenna cable’s connector does not fit in the ANT. connector, you might also need a Motorola-to BNC antenna plug adapter (available at a local electronics store).

REMOTE

DC 12V

EXT.

SP.

ANT.

11

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Page Precautions Contents Page LTR Introduction8 9 Front and Rear ViewsIcon Display Terminology What is Scanning?What is Searching? What is Trunk Tracking?Page Feature Highlights Where to Obtain More Information Information on the InternetScanner.uniden.com Included with Your Scanner Package Optional AccessoriesInstalling the BCT8 For Home Use Desktop InstallationFor Mobile Use In-Car Installation Connecting the Power Cord Installation for everyday use Supplied mounting knobs Attach the scanner to the mounting bracket usingTypical Mounting Methods Mounting the Scanner in Your VehicleDC power Installation Applying Power for Vehicle InstallationListening Safely Applying Power Using Standard AC PowerConnecting an External Speaker Connecting the Clone CableTurn the Scanner On Scanning OverviewHow Squelch Works Setting the SquelchHighway Patrol Scanning Selecting the StateScanning Highway Patrol Frequency Muting the Alert Tone Alert Tone VolumeHighway Patrol Scan Hold Highway Warning AlertAlert Light Adjustment Skip FrequenciesPriority Channels Florida Trunked Highway Frequency Private Bank Scanning Programming Frequencies into ChannelsDeleting a Stored Frequency Duplicate Frequency Alert Memory LockScanning Private Bank Restoring a Locked-out Channel in Hold Mode Hold/ResumeChannel Lockout Restoring All Locked-out Channels Priority ScanChanging the Priority Channel Service Scanning Band Search Setting a Search BandSearch Hold Feature Data SkipFrequency Skip Storing Search Frequencies DelayTrunk Tracking Selecting Trunking System Type Programming Trunking FrequenciesProgramming Talk Group ID/Scan Lists Programming Trunking FrequenciesTo enter a Partial Edacs ID To enter a Type 2 Talk Group IDTo enter a Type 1 ID To enter a Full Edacs IDReceiving Trunked Systems ID Scan ModeID Scan Hold Feature ID Search ModeTo directly access a specific ID location Deleting a Stored ID ID Monitor ModeID Search Hold and Direct Entry ID in Hold Mode Programming Scan Lists During SearchReview ID Lockout To restore a single ID, follow these stepsTo restore all locked out IDs in a bank once ID LockoutMoving between Scan List Memories Setting the Delay Mode for Trunking ModeSetting Priority in Trunking Mode Trunking Frequency ConfirmationMulti-Track Operational Details Multi-TrackEdacs Reception Edacs TrackingProgramming Edacs System Frequencies An Edacs Trunked system Edacs ID Range Search Special Edacs FeaturesLTR Tracking LTR ReceptionMotorola Tracking Motorola ReceptionSelecting Preset Fleet Map Fleet Map ProgrammingProgramming a User Fleet Map Programming a Hybrid System Toggling the Status Bit Control Channel Only ModeDisconnect Tone Detect Option End Code To program your scanner PC Control ModeRemote Interface To connect Scanner to PCClone Mode Start Remote Mode and Change Transfer SpeedScanner.uniden.com PC Control Parameter To connect the Scanner to Scanner If you wish to clone another scanner right away General Use Care and MaintenanceNot receiving alarms Check antenna connections TroubleshootingAdjust the squelch for Trunking mode refer to Specifications State Code Order AppendixPreset Fleet Maps E1P9 Block Type I Programming Information User Defined Fleet MapsFleet Map Size Codes Memo Memo Uniden America Corporation One Year Limited Warranty

BCT-8 specifications

The Uniden BCT-8 is a portable scanner that has made a significant impact in the world of communications monitoring. Designed for both amateur enthusiasts and professional users, this device provides a robust set of features, making it an essential tool for anyone interested in receiving and decoding a wide range of radio frequencies.

One of the standout features of the BCT-8 is its ability to scan both conventional and trunked radio systems. This versatility allows users to listen to everything from local police and fire department communications to amateur radio operations and even aviation channels. The scanner operates between 25 MHz and 1300 MHz, covering a wide array of frequencies that cater to diverse listening interests.

The BCT-8 is equipped with a user-friendly interface, featuring an LCD screen that displays clearly readable information such as channel frequencies and descriptions. Additionally, it utilizes a programmable scan feature, enabling users to store frequencies in memory for quick access. This functionality is particularly useful for those who regularly monitor specific channels, saving time and simplifying the scanning process.

Another notable technology in the BCT-8 is its capability to decode CTCSS and DCS tones, allowing users to filter out unwanted signals and focus on the conversations that matter most to them. This feature is particularly beneficial for monitoring crowded frequencies, ensuring that listeners can hone in on their desired transmissions without interference.

The battery life of the Uniden BCT-8 is also impressive, providing extended use for those on the go. It can operate on AA batteries or a rechargeable battery pack, giving users flexibility depending on their listening habits and requirements.

In terms of build quality, the BCT-8 is sturdy yet compact, making it portable enough to carry during outdoor activities or while traveling. This is complemented by an included belt clip, allowing for hands-free operations, perfect for fieldwork or public safety applications.

Overall, the Uniden BCT-8 stands out for its extensive feature set and reliable performance, making it an ideal choice for individuals who wish to explore the rich world of radio communications. Its combination of advanced scanning capabilities, ease of use, and portability makes it a valuable addition to any scanner enthusiast's toolkit. Whether for personal use or professional monitoring, the BCT-8 excels in delivering comprehensive reception of diverse radio signals.
Top Page Image Contents