Uniden BCT-8 manual Care and Maintenance, General Use

Page 56

Care and Maintenance

General Use

•Turn the scanner OFF before disconnecting the power.

•Always write down the programmed frequencies in the event of memory loss.

•If memory is lost, simply reprogram each channel.

The display shows 000.0000 in all channels when there has been a memory loss.

Location

•Do not use the scanner in high-moisture environments such as the kitchen or bathroom.

•Avoid placing the unit in direct sunlight or near heating elements or vents.

•If the scanner receives strong interference or electrical noise, move it or its antenna away from the source of the noise. If possible, a higher elevation may provide better reception.

Cleaning

•Disconnect the power to the unit before cleaning.

•Clean the outside of the scanner with a mild detergent.

To prevent scratches, do not use abrasive cleaners or solvents. Be careful not to rub the LCD window.

•Do not use excessive amounts of water.

Repairs

•Do not attempt any repair. The scanner contains no user serviceable parts. Contact the Uniden Customer Service Center or take it to a qualified repair technician.

Birdies

•All radios can receive birdies (undesired signals). If your scanner stops during Scan mode and no sound is heard, it may be receiving a birdie. Birdies are internally generated signals inherent in the electronics of the receiver.

Press L/O to lockout the channel, and then press HOLD/RESUME to resume scanning.

52

Page 55 Page 57
Image 56
Page 55 Page 57
Contents Page Precautions Contents Page Introduction LTRFront and Rear Views 8 9Icon Display What is Scanning? What is Searching?What is Trunk Tracking? TerminologyPage Feature Highlights Scanner.uniden.com Where to Obtain More InformationInformation on the Internet Optional Accessories Included with Your Scanner PackageFor Mobile Use In-Car Installation Installing the BCT8For Home Use Desktop Installation Connecting the Power Cord Installation for everyday use Attach the scanner to the mounting bracket using Typical Mounting MethodsMounting the Scanner in Your Vehicle Supplied mounting knobsApplying Power for Vehicle Installation DC power InstallationApplying Power Using Standard AC Power Connecting an External SpeakerConnecting the Clone Cable Listening SafelyScanning Overview Turn the Scanner OnSetting the Squelch How Squelch WorksScanning Highway Patrol Frequency Highway Patrol ScanningSelecting the State Alert Tone Volume Highway Patrol Scan HoldHighway Warning Alert Muting the Alert TonePriority Channels Alert Light AdjustmentSkip Frequencies Florida Trunked Highway Frequency Deleting a Stored Frequency Private Bank ScanningProgramming Frequencies into Channels Scanning Private Bank Duplicate Frequency AlertMemory Lock Channel Lockout Restoring a Locked-out Channel in Hold ModeHold/Resume Changing the Priority Channel Restoring All Locked-out ChannelsPriority Scan Service Scanning Setting a Search Band Band SearchFrequency Skip Search Hold FeatureData Skip Delay Storing Search FrequenciesTrunk Tracking Programming Trunking Frequencies Selecting Trunking System TypeProgramming Trunking Frequencies Programming Talk Group ID/Scan ListsTo enter a Type 2 Talk Group ID To enter a Type 1 IDTo enter a Full Edacs ID To enter a Partial Edacs IDID Scan Mode Receiving Trunked SystemsTo directly access a specific ID location ID Scan Hold FeatureID Search Mode ID Monitor Mode ID Search Hold and Direct Entry ID in Hold ModeProgramming Scan Lists During Search Deleting a Stored IDTo restore a single ID, follow these steps To restore all locked out IDs in a bank onceID Lockout Review ID LockoutSetting the Delay Mode for Trunking Mode Setting Priority in Trunking ModeTrunking Frequency Confirmation Moving between Scan List MemoriesMulti-Track Multi-Track Operational DetailsProgramming Edacs System Frequencies Edacs ReceptionEdacs Tracking An Edacs Trunked system Special Edacs Features Edacs ID Range SearchLTR Reception LTR TrackingMotorola Reception Motorola TrackingProgramming a User Fleet Map Selecting Preset Fleet MapFleet Map Programming Programming a Hybrid System Control Channel Only Mode Toggling the Status BitDisconnect Tone Detect Option End Code PC Control Mode Remote InterfaceTo connect Scanner to PC To program your scannerScanner.uniden.com PC Control Parameter Clone ModeStart Remote Mode and Change Transfer Speed To connect the Scanner to Scanner If you wish to clone another scanner right away Care and Maintenance General UseTroubleshooting Not receiving alarms Check antenna connectionsAdjust the squelch for Trunking mode refer to Specifications Appendix State Code OrderPreset Fleet Maps E1P9 Block User Defined Fleet Maps Type I Programming InformationFleet Map Size Codes Memo Memo One Year Limited Warranty Uniden America Corporation

BCT-8 specifications

The Uniden BCT-8 is a portable scanner that has made a significant impact in the world of communications monitoring. Designed for both amateur enthusiasts and professional users, this device provides a robust set of features, making it an essential tool for anyone interested in receiving and decoding a wide range of radio frequencies.

One of the standout features of the BCT-8 is its ability to scan both conventional and trunked radio systems. This versatility allows users to listen to everything from local police and fire department communications to amateur radio operations and even aviation channels. The scanner operates between 25 MHz and 1300 MHz, covering a wide array of frequencies that cater to diverse listening interests.

The BCT-8 is equipped with a user-friendly interface, featuring an LCD screen that displays clearly readable information such as channel frequencies and descriptions. Additionally, it utilizes a programmable scan feature, enabling users to store frequencies in memory for quick access. This functionality is particularly useful for those who regularly monitor specific channels, saving time and simplifying the scanning process.

Another notable technology in the BCT-8 is its capability to decode CTCSS and DCS tones, allowing users to filter out unwanted signals and focus on the conversations that matter most to them. This feature is particularly beneficial for monitoring crowded frequencies, ensuring that listeners can hone in on their desired transmissions without interference.

The battery life of the Uniden BCT-8 is also impressive, providing extended use for those on the go. It can operate on AA batteries or a rechargeable battery pack, giving users flexibility depending on their listening habits and requirements.

In terms of build quality, the BCT-8 is sturdy yet compact, making it portable enough to carry during outdoor activities or while traveling. This is complemented by an included belt clip, allowing for hands-free operations, perfect for fieldwork or public safety applications.

Overall, the Uniden BCT-8 stands out for its extensive feature set and reliable performance, making it an ideal choice for individuals who wish to explore the rich world of radio communications. Its combination of advanced scanning capabilities, ease of use, and portability makes it a valuable addition to any scanner enthusiast's toolkit. Whether for personal use or professional monitoring, the BCT-8 excels in delivering comprehensive reception of diverse radio signals.
Top Page Image Contents