Uniden BCT-8 manual Applying Power Using Standard AC Power, Connecting an External Speaker

Page 17

Applying Power Using Standard AC Power

To power the scanner from an AC outlet, use the provided AC adapter with a 5.5 mm outer diameter/2.1mm inner diameter tip.

Caution: You must use a Class 2 power source that supplies 12V DC and delivers at least 500 mA. The cord connector’s center tip must be set to positive and its plug must fit the scanner’s DC 12V jack. Using an adapter that does not meet these specifi- cations could damage the scanner or the adapter.

Always connect the AC adapter to the scanner before you connect it to AC power. When you finish, disconnect the adapter from the AC power before you disconnect it from

the scanner.

1.Insert the adapter’s barrel plug into the DC 12V jack on the rear of the scanner.

2.Plug the adapter into a standard AC outlet.

Note: Use only the AC adapter supplied with your scanner.

REMOTE

DC 12V

EXT.

SP.

ANT.

12V

Connecting an External Speaker

In a noisy area, an external speaker (available at a local electronics store) positioned in the right place might provide more comfortable listening.

Plug the speaker cable’s 1/8 inch (3.5 mm) plug into your scanner’s EXT. SP. jack.

Note: Connecting an external speaker disconnects the scanner’s internal speaker.

REMOTE

DC 12V

EXT.

SP.

ANT.

Listening Safely

Do not use the earphone. The volume is not adjustable for the Warning Alert and damage to your hearing could occur.

Connecting the Clone Cable

You can transfer the programmed data to and from another BCT8 scanner using a RS232C Straight Cable (9 pin to 9 pin) (not supplied). Connect the cable between each scanner’s REMOTE jacks. See "Clone Mode" on page 49. You can also upload or download the programmed data to or from a PC using optional programming software available through your local electronics store.

13

Image 17
Contents Page Precautions Contents Page LTR Introduction8 9 Front and Rear ViewsIcon Display What is Searching? What is Scanning?What is Trunk Tracking? TerminologyPage Feature Highlights Scanner.uniden.com Where to Obtain More InformationInformation on the Internet Included with Your Scanner Package Optional AccessoriesFor Mobile Use In-Car Installation Installing the BCT8For Home Use Desktop Installation Connecting the Power Cord Installation for everyday use Typical Mounting Methods Attach the scanner to the mounting bracket usingMounting the Scanner in Your Vehicle Supplied mounting knobsDC power Installation Applying Power for Vehicle InstallationConnecting an External Speaker Applying Power Using Standard AC PowerConnecting the Clone Cable Listening SafelyTurn the Scanner On Scanning OverviewHow Squelch Works Setting the SquelchScanning Highway Patrol Frequency Highway Patrol ScanningSelecting the State Highway Patrol Scan Hold Alert Tone VolumeHighway Warning Alert Muting the Alert TonePriority Channels Alert Light AdjustmentSkip Frequencies Florida Trunked Highway Frequency Deleting a Stored Frequency Private Bank ScanningProgramming Frequencies into Channels Scanning Private Bank Duplicate Frequency AlertMemory Lock Channel Lockout Restoring a Locked-out Channel in Hold ModeHold/Resume Changing the Priority Channel Restoring All Locked-out ChannelsPriority Scan Service Scanning Band Search Setting a Search BandFrequency Skip Search Hold FeatureData Skip Storing Search Frequencies DelayTrunk Tracking Selecting Trunking System Type Programming Trunking FrequenciesProgramming Talk Group ID/Scan Lists Programming Trunking FrequenciesTo enter a Type 1 ID To enter a Type 2 Talk Group IDTo enter a Full Edacs ID To enter a Partial Edacs IDReceiving Trunked Systems ID Scan ModeTo directly access a specific ID location ID Scan Hold FeatureID Search Mode ID Search Hold and Direct Entry ID in Hold Mode ID Monitor ModeProgramming Scan Lists During Search Deleting a Stored IDTo restore all locked out IDs in a bank once To restore a single ID, follow these stepsID Lockout Review ID LockoutSetting Priority in Trunking Mode Setting the Delay Mode for Trunking ModeTrunking Frequency Confirmation Moving between Scan List MemoriesMulti-Track Operational Details Multi-TrackProgramming Edacs System Frequencies Edacs ReceptionEdacs Tracking An Edacs Trunked system Edacs ID Range Search Special Edacs FeaturesLTR Tracking LTR ReceptionMotorola Tracking Motorola ReceptionProgramming a User Fleet Map Selecting Preset Fleet MapFleet Map Programming Programming a Hybrid System Toggling the Status Bit Control Channel Only ModeDisconnect Tone Detect Option End Code Remote Interface PC Control ModeTo connect Scanner to PC To program your scannerScanner.uniden.com PC Control Parameter Clone ModeStart Remote Mode and Change Transfer Speed To connect the Scanner to Scanner If you wish to clone another scanner right away General Use Care and MaintenanceNot receiving alarms Check antenna connections TroubleshootingAdjust the squelch for Trunking mode refer to Specifications State Code Order AppendixPreset Fleet Maps E1P9 Block Type I Programming Information User Defined Fleet MapsFleet Map Size Codes Memo Memo Uniden America Corporation One Year Limited Warranty

BCT-8 specifications

The Uniden BCT-8 is a portable scanner that has made a significant impact in the world of communications monitoring. Designed for both amateur enthusiasts and professional users, this device provides a robust set of features, making it an essential tool for anyone interested in receiving and decoding a wide range of radio frequencies.

One of the standout features of the BCT-8 is its ability to scan both conventional and trunked radio systems. This versatility allows users to listen to everything from local police and fire department communications to amateur radio operations and even aviation channels. The scanner operates between 25 MHz and 1300 MHz, covering a wide array of frequencies that cater to diverse listening interests.

The BCT-8 is equipped with a user-friendly interface, featuring an LCD screen that displays clearly readable information such as channel frequencies and descriptions. Additionally, it utilizes a programmable scan feature, enabling users to store frequencies in memory for quick access. This functionality is particularly useful for those who regularly monitor specific channels, saving time and simplifying the scanning process.

Another notable technology in the BCT-8 is its capability to decode CTCSS and DCS tones, allowing users to filter out unwanted signals and focus on the conversations that matter most to them. This feature is particularly beneficial for monitoring crowded frequencies, ensuring that listeners can hone in on their desired transmissions without interference.

The battery life of the Uniden BCT-8 is also impressive, providing extended use for those on the go. It can operate on AA batteries or a rechargeable battery pack, giving users flexibility depending on their listening habits and requirements.

In terms of build quality, the BCT-8 is sturdy yet compact, making it portable enough to carry during outdoor activities or while traveling. This is complemented by an included belt clip, allowing for hands-free operations, perfect for fieldwork or public safety applications.

Overall, the Uniden BCT-8 stands out for its extensive feature set and reliable performance, making it an ideal choice for individuals who wish to explore the rich world of radio communications. Its combination of advanced scanning capabilities, ease of use, and portability makes it a valuable addition to any scanner enthusiast's toolkit. Whether for personal use or professional monitoring, the BCT-8 excels in delivering comprehensive reception of diverse radio signals.