Uniden BCT-8 ID Scan Hold Feature, ID Search Mode, To directly access a specific ID location

Page 38

Note: One Scan List must always be active. If you try and deactivate all the Scan Lists, Scan List 1 will automatically be active.

3. To restore a Scan List to active scanning, press its number again.

☞Remember! When you press TRUNK in the Trunking mode, you can be out of the Trunking mode and enter into Private Scan Hold mode.

Note: •

appears on the display during Trunk Scan instead of simply

.

ID Scan Hold Feature

If you want to stop on a ID during ID scanning, press

HOLD/RESUME.

To directly access a specific ID location:

There are several ways to access a specific ID quickly.

1. Press HOLD/RESUME to enter into Hold mode.

2. Using the keypad, ▲ or ▼ key, enter the ID location number (See page 31).

3.Press HOLD/RESUME.

If you want to resume scanning, press HOLD/RESUME.

ID Search Mode

Once you have programmed all the frequencies for a trunked system, Search will let you immediately start hearing transmissions.

When in the Trunking mode, press SRCH and the scanner begins to find any active IDs. When the scanner finds any ID, you will hear it.

Talkgroups display differently in Motorola, EDACS and LTR systems. You should read the appropriate parts of this guide to understand the formats.

The display indicates the bank and the type of trunked system you are monitoring. While monitoring on ID, press the ▲ key, and the scanner will check if any other IDs are active.

Regardless of the system, you won't know exactly who you are receiving until you listen for a while, or refer to frequency guides or internet sites such as www.trunktracker.com.

Of course, figuring out who each ID represents is half the fun of Trunk Tracking.

Later, when you learn more about a system, you will want to store lists of talkgroups. Then you can scan specific agencies and users, and use the many other features your radio provides.

34

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Page Precautions Contents Page Introduction LTRFront and Rear Views 8 9Icon Display What is Trunk Tracking? What is Scanning?What is Searching? TerminologyPage Feature Highlights Scanner.uniden.com Where to Obtain More InformationInformation on the Internet Optional Accessories Included with Your Scanner PackageFor Mobile Use In-Car Installation Installing the BCT8For Home Use Desktop Installation Connecting the Power Cord Installation for everyday use Mounting the Scanner in Your Vehicle Attach the scanner to the mounting bracket usingTypical Mounting Methods Supplied mounting knobsApplying Power for Vehicle Installation DC power InstallationConnecting the Clone Cable Applying Power Using Standard AC PowerConnecting an External Speaker Listening SafelyScanning Overview Turn the Scanner OnSetting the Squelch How Squelch WorksScanning Highway Patrol Frequency Highway Patrol ScanningSelecting the State Highway Warning Alert Alert Tone VolumeHighway Patrol Scan Hold Muting the Alert TonePriority Channels Alert Light AdjustmentSkip Frequencies Florida Trunked Highway Frequency Deleting a Stored Frequency Private Bank ScanningProgramming Frequencies into Channels Scanning Private Bank Duplicate Frequency AlertMemory Lock Channel Lockout Restoring a Locked-out Channel in Hold ModeHold/Resume Changing the Priority Channel Restoring All Locked-out ChannelsPriority Scan Service Scanning Setting a Search Band Band SearchFrequency Skip Search Hold FeatureData Skip Delay Storing Search FrequenciesTrunk Tracking Programming Trunking Frequencies Selecting Trunking System TypeProgramming Trunking Frequencies Programming Talk Group ID/Scan ListsTo enter a Full Edacs ID To enter a Type 2 Talk Group IDTo enter a Type 1 ID To enter a Partial Edacs IDID Scan Mode Receiving Trunked SystemsTo directly access a specific ID location ID Scan Hold FeatureID Search Mode Programming Scan Lists During Search ID Monitor ModeID Search Hold and Direct Entry ID in Hold Mode Deleting a Stored IDID Lockout To restore a single ID, follow these stepsTo restore all locked out IDs in a bank once Review ID LockoutTrunking Frequency Confirmation Setting the Delay Mode for Trunking ModeSetting Priority in Trunking Mode Moving between Scan List MemoriesMulti-Track Multi-Track Operational DetailsProgramming Edacs System Frequencies Edacs ReceptionEdacs Tracking An Edacs Trunked system Special Edacs Features Edacs ID Range SearchLTR Reception LTR TrackingMotorola Reception Motorola TrackingProgramming a User Fleet Map Selecting Preset Fleet MapFleet Map Programming Programming a Hybrid System Control Channel Only Mode Toggling the Status BitDisconnect Tone Detect Option End Code To connect Scanner to PC PC Control ModeRemote Interface To program your scannerScanner.uniden.com PC Control Parameter Clone ModeStart Remote Mode and Change Transfer Speed To connect the Scanner to Scanner If you wish to clone another scanner right away Care and Maintenance General UseTroubleshooting Not receiving alarms Check antenna connectionsAdjust the squelch for Trunking mode refer to Specifications Appendix State Code OrderPreset Fleet Maps E1P9 Block User Defined Fleet Maps Type I Programming InformationFleet Map Size Codes Memo Memo One Year Limited Warranty Uniden America Corporation

BCT-8 specifications

The Uniden BCT-8 is a portable scanner that has made a significant impact in the world of communications monitoring. Designed for both amateur enthusiasts and professional users, this device provides a robust set of features, making it an essential tool for anyone interested in receiving and decoding a wide range of radio frequencies.

One of the standout features of the BCT-8 is its ability to scan both conventional and trunked radio systems. This versatility allows users to listen to everything from local police and fire department communications to amateur radio operations and even aviation channels. The scanner operates between 25 MHz and 1300 MHz, covering a wide array of frequencies that cater to diverse listening interests.

The BCT-8 is equipped with a user-friendly interface, featuring an LCD screen that displays clearly readable information such as channel frequencies and descriptions. Additionally, it utilizes a programmable scan feature, enabling users to store frequencies in memory for quick access. This functionality is particularly useful for those who regularly monitor specific channels, saving time and simplifying the scanning process.

Another notable technology in the BCT-8 is its capability to decode CTCSS and DCS tones, allowing users to filter out unwanted signals and focus on the conversations that matter most to them. This feature is particularly beneficial for monitoring crowded frequencies, ensuring that listeners can hone in on their desired transmissions without interference.

The battery life of the Uniden BCT-8 is also impressive, providing extended use for those on the go. It can operate on AA batteries or a rechargeable battery pack, giving users flexibility depending on their listening habits and requirements.

In terms of build quality, the BCT-8 is sturdy yet compact, making it portable enough to carry during outdoor activities or while traveling. This is complemented by an included belt clip, allowing for hands-free operations, perfect for fieldwork or public safety applications.

Overall, the Uniden BCT-8 stands out for its extensive feature set and reliable performance, making it an ideal choice for individuals who wish to explore the rich world of radio communications. Its combination of advanced scanning capabilities, ease of use, and portability makes it a valuable addition to any scanner enthusiast's toolkit. Whether for personal use or professional monitoring, the BCT-8 excels in delivering comprehensive reception of diverse radio signals.
Top Page Image Contents