Uniden BCT-8 manual Florida

Page 23

You will experience a slight in the conversations you hear as the scanner checks the Priority channels. You can cancel the priority check and the interruptions in the conversations by pressing HOLD/RESUME to hold on the frequency.

Note: The Highway Warning Alert is inoperative while the scanner is on Hold.

Remember to press HOLD/RESUME to return to normal priority-scan operation.

Priority channel cannot be changed, but you can lock-out priority channels using L/O. Priority channels have been pre-determined by the manufacturer as those Highway Patrol frequencies most commonly used for mobile extenders and for car-to-car and aircraft-to-car operations. Mobile extenders re-transmit every radio broadcast received on the patrol car radio to the officer’s walkie-talkie at low-power. Every time any officer or dispatcher talks (transmits), the signal is broadcast like a beacon at low-power whether or not the officer is out of the car.

You can select Priority Scanning mode by pressing PRI.

•Normal Priority Scan mode.

The scanner checks the Priority frequency every two seconds. “PRI” will be displayed.

•Priority only mode.

To only monitor the priority frequencies, press and hold PRI to select Priority Only. This mode is especially recommended for the following states:

(Arizona)

(Michigan)

(Delaware)

(Oklahoma)

(Florida)

(Wisconsin)

“PRI” flashes when you select Priority Only Mode.

•Priority off mode

The scanner does not check the Priority frequency. “PRI” will not displayed.

19

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Page Precautions Contents Page LTR Introduction8 9 Front and Rear ViewsIcon Display Terminology What is Scanning?What is Searching? What is Trunk Tracking?Page Feature Highlights Scanner.uniden.com Where to Obtain More InformationInformation on the Internet Included with Your Scanner Package Optional AccessoriesFor Mobile Use In-Car Installation Installing the BCT8For Home Use Desktop Installation Connecting the Power Cord Installation for everyday use Supplied mounting knobs Attach the scanner to the mounting bracket usingTypical Mounting Methods Mounting the Scanner in Your VehicleDC power Installation Applying Power for Vehicle InstallationListening Safely Applying Power Using Standard AC PowerConnecting an External Speaker Connecting the Clone CableTurn the Scanner On Scanning OverviewHow Squelch Works Setting the SquelchScanning Highway Patrol Frequency Highway Patrol ScanningSelecting the State Muting the Alert Tone Alert Tone VolumeHighway Patrol Scan Hold Highway Warning AlertPriority Channels Alert Light AdjustmentSkip Frequencies Florida Trunked Highway Frequency Deleting a Stored Frequency Private Bank ScanningProgramming Frequencies into Channels Scanning Private Bank Duplicate Frequency AlertMemory Lock Channel Lockout Restoring a Locked-out Channel in Hold ModeHold/Resume Changing the Priority Channel Restoring All Locked-out ChannelsPriority Scan Service Scanning Band Search Setting a Search BandFrequency Skip Search Hold FeatureData Skip Storing Search Frequencies DelayTrunk Tracking Selecting Trunking System Type Programming Trunking FrequenciesProgramming Talk Group ID/Scan Lists Programming Trunking FrequenciesTo enter a Partial Edacs ID To enter a Type 2 Talk Group IDTo enter a Type 1 ID To enter a Full Edacs IDReceiving Trunked Systems ID Scan ModeTo directly access a specific ID location ID Scan Hold FeatureID Search Mode Deleting a Stored ID ID Monitor ModeID Search Hold and Direct Entry ID in Hold Mode Programming Scan Lists During SearchReview ID Lockout To restore a single ID, follow these stepsTo restore all locked out IDs in a bank once ID LockoutMoving between Scan List Memories Setting the Delay Mode for Trunking ModeSetting Priority in Trunking Mode Trunking Frequency ConfirmationMulti-Track Operational Details Multi-TrackProgramming Edacs System Frequencies Edacs ReceptionEdacs Tracking An Edacs Trunked system Edacs ID Range Search Special Edacs FeaturesLTR Tracking LTR ReceptionMotorola Tracking Motorola ReceptionProgramming a User Fleet Map Selecting Preset Fleet MapFleet Map Programming Programming a Hybrid System Toggling the Status Bit Control Channel Only ModeDisconnect Tone Detect Option End Code To program your scanner PC Control ModeRemote Interface To connect Scanner to PCScanner.uniden.com PC Control Parameter Clone ModeStart Remote Mode and Change Transfer Speed To connect the Scanner to Scanner If you wish to clone another scanner right away General Use Care and MaintenanceNot receiving alarms Check antenna connections TroubleshootingAdjust the squelch for Trunking mode refer to Specifications State Code Order AppendixPreset Fleet Maps E1P9 Block Type I Programming Information User Defined Fleet MapsFleet Map Size Codes Memo Memo Uniden America Corporation One Year Limited Warranty

BCT-8 specifications

The Uniden BCT-8 is a portable scanner that has made a significant impact in the world of communications monitoring. Designed for both amateur enthusiasts and professional users, this device provides a robust set of features, making it an essential tool for anyone interested in receiving and decoding a wide range of radio frequencies.

One of the standout features of the BCT-8 is its ability to scan both conventional and trunked radio systems. This versatility allows users to listen to everything from local police and fire department communications to amateur radio operations and even aviation channels. The scanner operates between 25 MHz and 1300 MHz, covering a wide array of frequencies that cater to diverse listening interests.

The BCT-8 is equipped with a user-friendly interface, featuring an LCD screen that displays clearly readable information such as channel frequencies and descriptions. Additionally, it utilizes a programmable scan feature, enabling users to store frequencies in memory for quick access. This functionality is particularly useful for those who regularly monitor specific channels, saving time and simplifying the scanning process.

Another notable technology in the BCT-8 is its capability to decode CTCSS and DCS tones, allowing users to filter out unwanted signals and focus on the conversations that matter most to them. This feature is particularly beneficial for monitoring crowded frequencies, ensuring that listeners can hone in on their desired transmissions without interference.

The battery life of the Uniden BCT-8 is also impressive, providing extended use for those on the go. It can operate on AA batteries or a rechargeable battery pack, giving users flexibility depending on their listening habits and requirements.

In terms of build quality, the BCT-8 is sturdy yet compact, making it portable enough to carry during outdoor activities or while traveling. This is complemented by an included belt clip, allowing for hands-free operations, perfect for fieldwork or public safety applications.

Overall, the Uniden BCT-8 stands out for its extensive feature set and reliable performance, making it an ideal choice for individuals who wish to explore the rich world of radio communications. Its combination of advanced scanning capabilities, ease of use, and portability makes it a valuable addition to any scanner enthusiast's toolkit. Whether for personal use or professional monitoring, the BCT-8 excels in delivering comprehensive reception of diverse radio signals.
Top Page Image Contents