3:SYSTEM OPTION → 6:CLONE
on both scanners. Then, on the scanner that has the data you want to transfer, select MASTER and press E. On the scanner that you want to transfer the data into, select SLAVE and press E. Then, press SCAN on both scanner to start the transfer.
Caution: This deletes all data from the unit you select as SLAVE. Make certain that you pick the correct set- tings for each scanner to prevent data loss.
During transfer both scanners display the following.
CLONE
==>
MASTER UNIT
CLONE
== <
SLAVE UNIT
When transfer is complete, the scanners display COMPLETE. Turn both scanners off and then back on to initialize them.
If data transfer is not successful, the following message | |
appears. | CLONE |
| |
| ERROR |
| MASTER UNIT |
To clear the error, press . . To exit the clone mode, repeatedly press MENU/BACK.
62