Vanguard Managed Solutions manual Numbering, Vanguard 3400 Series Rear Panel Port Numbers

Installing The Vanguard 3400 Series

Cabling Your Vanguard 3400 Series

Introduction This section provides information to help you cable your Vanguard 3400 Series.

Caution

Before connecting cables to the motherboard or daughtercard ports, be sure that the screws holding the motherboard in place are installed. Otherwise, the motherboard could loosen under the weight of the cables and cause damage to the equipment.

Also use proper cable strain relief to prevent damage due to excessive cable weight.

Rear Panel Port Figure 3-3shows the port numbering on the Vanguard 3400 Series rear panels.

Numbering

3410	DC Site 1
	Ports 7-9

5V DC	RS-232 Serial	CTP	Routed
Power	(Sync/Async)	Port 4	Ethernet Ports
Input	Port 1		Ports 23, 24
3460	DC Site 1		DC Site 2
	(Ports 7-9, 51-54)		(Ports 10-12, 61-64)

5V DC	Multi-Function	CTP	Routed
Power	Serial	Port 4	Ethernet Ports
Input	Port 1		Ports 23, 24

Figure 3-3. Vanguard 3400 Series Rear Panel Port Numbers

Caution

Do not connect the Ports 4, 23, or 24 to the Public Communications Network.

Installation and Replacement 3-7