![](/images/new-backgrounds/1148925/148925107x1.webp)
Modifying Your Vanguard 3400 Series
Inserting Encryption
PCI Mezzanine Card
Adding Encryption PCI Mezzanine Card
1Insert the module into the connector at an angle as shown.
2Push down on the module so that it is parallel to the motherboard and the release levers lock it into place.
Removing Encryption PCI Mezzanine Card
Release Lever
Removing Encryption PCI Mezzanine Card
1Pull outward on the release levers at the side of the card, to allow the module to be removed from the connector.
2Raise the leading edge of module so that it is at an angle to the motherboard and remove it from the connector.
Figure 3-10. Encryption PCI Mezzanine Card Installation/Replacement
Installation and Replacement |