Wasp Bar Code WLR8900 manual Upper/Lower Case

Page 12

Chapter 5

Upper/Lower Case

• Caps Lock Auto (For PC XT/AT only):

In Auto Trace mode, the scanner will keep track of the Caps Lock status automatically. For some PCs, the scanning performance may be compromised because of the auto tracing. If the scanning performance is poor (or cannot scan) or the scanner cannot output the upper/lower case characters correctly, try to select one of the next two choices instead of auto tracing.

• Caps Lock Off:

When the keyboard is in the unshifted state (Caps Lock is not pressed), select “Lower Case.”

• Caps Lock On:

When the keyboard is in the shifted state (Caps Lock is on), select “Upper Case.”

Caps Lock On

Caps Lock Off *

Caps Lock Auto

*Default

9

Image 12
Contents WLR 8900/8905 Programming Guide Page Table of Contents Introduction Bar Code Symbologies Installation Quick Start Setup & Configuration Autosense Stand Mode Factory Default & Keyboard ConnectionBeep Settings Beep and DelayInterblock Delay Upper/Lower Case Keyboard Language Preamble/Postamble Configuration Terminator Terminator/Code IDEnableDisable Enable/Disable Bar Code SymbologiesEAN Code 39 Settings Interleaved 2 of 5 and Code 93 Settings Code 128 and UCC/EAN 128 Settings MSI Plessey Settings Codabar Settings UPC-A Settings UPC-A Supplement Settings / UPC-A to EAN-13 UPC-E Settings UPC-E Supplement Settings EAN-8 Settings EAN-8 Supplement Settings EAN-13 Settings EAN-13 Supplement Settings Bar Code Test Symbols UPC-A EAN/JAN-13 Appendix B Ascii TableAppendix B Ascii Character DEL Appendix C Function Code for PCTechnical Specifications Appendix DProduct Support Frequently Asked Questions