Wasp Bar Code WLR8900 manual EAN-13 Settings

Page 29

Chapter 5

EAN-13 Settings

The EAN/JAN-13 (European Article Number/Japanese Article Number) is fixed length and is similar to the UPC-A symbology, but encodes a 13th digit. The nominal height for the EAN/JAN-8 bar code is one inch. The reduced size is 80% of the nominal size.

EAN-13 Enable *

EAN-13 Disable

Send Leading Digit *	Do Not Send
	Leading Digit

Send Check Digit *	Do Not Send
	Check Digit

ISBN Enable

ISBN Disable *

ISSN Enable

ISSN Disable *

*Default

Image 29

Contents WLR 8900/8905 Programming Guide Page Table of Contents Introduction Bar Code Symbologies Installation Quick Start Setup & Configuration Factory Default & Keyboard Connection Autosense Stand ModeBeep and Delay Beep SettingsInterblock Delay Upper/Lower Case Keyboard Language Preamble/Postamble Configuration Terminator/Code ID TerminatorEnable/Disable Bar Code Symbologies EnableDisableEAN Code 39 Settings Interleaved 2 of 5 and Code 93 Settings Code 128 and UCC/EAN 128 Settings MSI Plessey Settings Codabar Settings UPC-A Settings UPC-A Supplement Settings / UPC-A to EAN-13 UPC-E Settings UPC-E Supplement Settings EAN-8 Settings EAN-8 Supplement Settings EAN-13 Settings EAN-13 Supplement Settings Bar Code Test Symbols UPC-A EAN/JAN-13 Ascii Table Appendix BAppendix B Ascii Character DEL Function Code for PC Appendix CAppendix D Technical SpecificationsProduct Support Frequently Asked Questions