Wasp Bar Code WLR8900 manual Codabar Settings

Page 22

Chapter 5

Codabar Settings

Codabar is a variable length symbology capable of encoding six special alphanumeric characters, capital letters A through D, T, N, *, E, and all numeric digits. Codabar is one of the oldest bar code symbologies and is still used in some library applications. It should not be considered for new applications except under unusual circumstances.

See page 5 for information on setting the minimum and maximum lengths.

Codabar Enable *

Codabar Disable

Send Start/Stop *

Do Not Send

 

Start/Stop

Check Digit

Check Digit

Do Not Verify *

Verify And Send

Check Digit Verify

Minimum Length (6 *)

And Do Not Send

 

Maximum Length (48 *)

*Default

19

Image 22
Contents WLR 8900/8905 Programming Guide Page Table of Contents Introduction Bar Code Symbologies Installation Quick Start Setup & Configuration Autosense Stand Mode Factory Default & Keyboard ConnectionBeep Settings Beep and DelayInterblock Delay Upper/Lower Case Keyboard Language Preamble/Postamble Configuration Terminator Terminator/Code IDEnableDisable Enable/Disable Bar Code SymbologiesEAN Code 39 Settings Interleaved 2 of 5 and Code 93 Settings Code 128 and UCC/EAN 128 Settings MSI Plessey Settings Codabar Settings UPC-A Settings UPC-A Supplement Settings / UPC-A to EAN-13 UPC-E Settings UPC-E Supplement Settings EAN-8 Settings EAN-8 Supplement Settings EAN-13 Settings EAN-13 Supplement Settings Bar Code Test Symbols UPC-A EAN/JAN-13 Appendix B Ascii TableAppendix B Ascii Character DEL Appendix C Function Code for PCTechnical Specifications Appendix DProduct Support Frequently Asked Questions