Woods Equipment 1050 manual Dealer Check Lists, PRE-DELIVERY Check List, Delivery Check List

DEALER CHECK LISTS

PRE-DELIVERY CHECK LIST

Dealer’s Responsibility

Inspect the backhoe (and sub-frame when applicable) thoroughly after assembly to be certain it is set up properly before delivering it to the customer. The check lists are a reminder of points to inspect. Check off each item as it is found satisfactory or after proper adjust- ments are made.

___ Check all bolts to be sure they are tight.

___ Check that all lubrication points have been lubri- cated.

___ Check that all cotter pins and safety pins are properly installed.

___ Properly attach backhoe to tractor and make all necessary adjustments.

___ Check that hydraulic reservoir has been serviced and that hydraulic system and all functions have been operated through full cylinder stroke to purge air from system.

___ Make sure all hydraulic fittings are tight and hoses are properly routed and not twisted, bent sharply, kinked or pulled tight.

___ After pressurizing and operating all backhoe functions, stop tractor and make sure there are no leaks in the hydraulic system. Follow all safety rules when checking for leaks.

DELIVERY CHECK LIST

Dealer’s Responsibility

___ Present Operator's Manual and request that cus- tomer and all operators read it before operating equipment.

___ Point out all safety features of the equipment. Explain the importance and meaning of all safety decals and emphasize the potential hazards when not followed.

___ Show customer how to make adjustments.

___ Explain importance of lubrication and show lubri- cation points to customer.

___ Show customer the safe proper procedures to be used when mounting, dismounting and storing backhoe.

___ If backhoe is mounted to tractor 3-point hitch, explain the importance of the Saf-T-Lok) limiter. Point out (as shown in Operator's Manual) the correct attachment and adjustment of the limiter.

___ Point out the correct mounting of the hydraulic pump and routing of the hoses. Explain that dur- ing operation, mounting, dismounting and stor- age, care must be taken to prevent hose damage from pulling, twisting and kinking.

34 Dealer Check Lists 51861 (Rev. 6/16/2006)