Wizard Ca Co Wireless Scanner, CPT-8061 manual Installation and Configuration Procedures

Page 63

4.2.4 Installation and Configuration Procedures

The installation and configuration tasks required for Access Point involve preparing the receiver unit, connecting it to your local area network and then configuring the unit for proper network communications. To successfully perform these tasks, you must have access to, or know the following settings for the local area network used in conjunction with Furniture Wizard in your operations:

IP Address

Subnet Mask

Default Gateway

DNS Server

To install and configure Access Point on your local area network, perform each of the following tasks:

1.Unpack the Access Point receiver unit, black power supply and power cord.

A standard RJ45 Ethernet network cable is required to connect the Access Point

to the local area network; this cable is not supplied with the unit. Plug one end of the network cable into the receptacle labeled 10 BASE-Tin the rear center of the Access Point. Plug the other end of the network cable into the network server or

hub for your local area network.

2.Plug the cable end of the black power supply into the circular receptacle (labelled

DC IN 9V) located in the right rear corner of the Access Point receiver. Place the connector end of the AC power cord into the receptacle located on the other side of the power supply and then plug the power cord into a standard wall outlet.

3.After connecting Access Point to your local area network and powering up the unit,

it must be configured with the correct settings to allow it to properly communicate with your network. Access Point is delivered from the factory with a standard IP address of 192.168.1.1 (the default address for Linksys routers). To test for proper communications between your local area network and Access Point, you will perform the following tasks (they are explained in detail in Steps 4 through 14):

Temporarily change the TCP/IP settings for your local area network to match the default settings supplied with Access Point by CIPHER Lab.

Verify that Access Point and your network can “talk” with each other.

Reset the TCP/IP settings for your LAN to their original settings.

Configure the TCP/IP settings for Access Point so it can successfully communicate with the original settings for your LAN.

Appendix A: Using Wireless Scanners with Furniture Wizard

59

Image 63

Contents Cipher Lab CPT-8061 Wireless Scanner Use and Installation Copyrights Table of Contents Appendix a Installation and Configuration Overview IntroductionAssumptions Using this ManualTechnical Support PublicationsGuide Conventions Page Access Point and Wireless Scanner Components CPT-8061 Wireless Scanner OverviewCPT-8061 Charging and Communication Cradle 1 3560 Bluetooth Access Point ReceiverPower Key CPT-8061 Bluetooth Wireless Terminal ScannerWireless Scanner Furniture Wizard Interface Wireless Scanner Furniture Wizard InterfaceUsing Wireless Scanners with Furniture Wizard File Download Dialog Loading and Configuring Cipher Scanner Agent SoftwareCipher Agent Install Shield Dialog Second Screen Cipher Agent Install Shield Dialog Final Screen Manage Scanner Port Lists Cipher Scanner Agent Cipher Scanner Agent Status Function Furniture Wizard Main Menu Double-click the Wizard Configuring Furniture Wizard for Scanner UseSetup & Registration Function Click Advanced Setup Extended Preferences Function Click Scanners tab Cipher User List Function Congratulations Power Key Using Wireless Scanners with Furniture WizardScanner Password Function Page Page Small Tag Taking Physical Inventory Inventory Function SelectionInventory Reconciliation Form Page Creating an Invoice Sales Function Selection Sales Scan Function Listing All Scanned ItemsFunction Key Transmitting Captured Data to Furniture WizardChanging the Item Quantity Page Inventory On Sale Function Inventory Transfer Function Receiving Purchase Orders Receive PO Function Selection Label SetupLarge Price Tag Small Price Tags Standard Warehouse tag Update All Inventory Items Dialog Processing a Scanned Item that is not in Furniture Wizard Receiving Items Using the Wireless ScannerCipher Data Manager Function in Furniture Wizard Click the Exit button when finished Recocile Receiving Function Reconciling Received ItemsProcessing Received Items Received Items with No Associated Purchase OrderInventory Label ƒ Label Creates a floor tag Bar Code Receiving Report Keyboard-less Receiving FunctionsPurchase Order Function Bar Code Report Button Print Tags Scanner Menu Regular Warehouse Tag ƒ 1 Warehouse Associating UPC and Bar Codes Teach Function Selection Page Performing Stock Checks Stock Check Function Selection Page Appendix a Installation and Configuration Preparing CPT-8061 Scanner Units Installing the Required HardwareScanner Resting in Charging Cradle Access Point Receiver Functions Installing and Configuring Access PointInstallation and Configuration Procedures Network Properties Appendix a Using Wireless Scanners with Furniture Wizard Network Set to Obtain IP/DNS Addresses Automatically Successful Communications Message ƒ Authentication Set this to 1 Enable Successful Communications Message Charging and Communications Cradle Uploading Firmware Updates to ScannersAppendix a Using Wireless Scanners with Furniture Wizard When the Load Program menu appears, press 1 Cradle IR Please Place in Cradle Message Download Complete Message Accessing Wireless Scanner Main Menu Pairing Wireless Scanners with Access PointBluetooth Menu Press 5, followed by Blue Enter New Program Message Configuring Wireless ScannersMain Menu Select 5 Configure option Select each option and enter correct LAN settings SubNet Mask Setting Subnet Mask SettingLocal IP Address Setting Local IP Address SettingDNS Server Setting Gateway IP Address SettingServer IP Setting Server IP SettingServer Port Setting Server Port Address SettingAppendix B Settings Worksheet / Miscellaneous Settings Worksheet Current Local Area Network SettingsAccess Point Settings Additional Access Point Settings Loading and Configuring the Cipher Scanner Agent Software Cipher Scanner and Agent Port SettingsPowering the Scanner On and Off Cipher Lab Kernel Update ProceduresSelect 1 Cradle IR Baud Rate Selection Downloaded Completely Message Displays upon startup after Program Installation Furniture Wizard Firmware Update Procedures When the Load Program menu appears, press 1 Cradle-IR Please Place in Cradle Message Download Complete Message Welcome to Scan-IT Message Optimizing the Furniture Wizard Database