XiNCOM XC-DPG603 manual Advanced Port

Page 16

XC-DPG603

Twin WAN DNS → IP

VPN Gateway

Chapter Contents

•Overview

•Port Options

•Load Balance

•Advanced PPPoE

•Advanced PPTP

Chapter 3 - Advanced Port

Overview

Port Options contains some options which can be set on either or both WAN ports. For most situations, the default values are satisfactory.

Load Balance screen is only functional if you are using both WAN ports. It allows you to determine the proportion of WAN trafﬁc sent through each port.

Advanced PPPoE setup is required if you wish to use multiple sessions on one or both of the WAN ports. It can also be used to manually connect or disconnect a PPPoE session. Otherwise, this screen can be ignored.

Advanced PPTP setup is required if using the PPTP connection method.

16

Image 16

Contents Twin WAN DNS IP VPN Gateway Table of Contents QoS Conﬁguration VPN Conﬁguration Introduction Use TWO ISPs for expanded bandwidth and redundancyFeatures Easy Setup Password Protected ConﬁgurationHttp Firmware Upgrade and backup Dhcp Server SupportPhysical Details SystemDefault Settings LED Action ConditionBasic Setup Overview ProcedureProcedure Configuring the XC-DPG603 for your LANNo Response? Configuring the XC-DPG603 for your LAN Connecting two broadband modems Installation Diagram for XC-DPG603Configuring for Internet Access Settings Primary Setup Connection ModeConnection Type Address InfoConfigure PCs on your LAN TCP/IP SettingsInternet Access OverviewFor Apple Clients For Linux ClientsFixed IP Address To act as a Dhcp Client recommendedAdvanced Port Health Check Auto Dialup Bridge Mode Port OptionsSettings Load Balance Load BalanceSettings Advanced PPPoE Advanced PPPoESettings Advanced Pptp Advanced PptpAdvanced Setup Host IP Host IPVirtual Servers Settings Virtual ServerVirtual Servers Settings Custom Virtual Servers Custom Virtual ServersCustom Virtual Servers Server ListSpecial Applications Settings Special ApplicationsSpecial Application To use the Dynamic DNS Feature Settings Dynamic DNSDynamic DNS Dynamic DNSMulti DMZ & UPnP For Dynamic IPSelect the desired WAN port Private IP AddressAdvanced Features Advanced FeaturesSettings Advanced Features Using Remote Web-based Setup HTTP// Internet IP Address of the XC-DPG603Security Management Firewall ExceptionAccess Filter Settings Block URLSettings Access Filter Block URLSession Limit & Firewall Exception Settings Session LimitSession Limit QoS Conﬁguration VPN Conﬁguration How it worksIPSec Global Settings IPSec Global SettingPolicy Setup VPN Policy SetupKey Management DNS Conﬁguration How it works XC-DPG602 & 603 GatewaysDomain Name Configuration NS Record Primary/Secondary Name Server Public WAN 1 & 2 IP AddressMX Record Mail Exchange Preference 1Map Host URL RecordCname Record Host URL ListSystem Information Management AssistantTrap Targets Syslog Conﬁguration Management AssistantMessage Status Updating the Firmware Backup your conﬁguration Using the Tftp Utility RecommendedTo save the XC-DPG603 Conﬁguration to a ﬁle Http Upgrade Firmware Uploading the FirmwareTo upload the ﬁrmware to the Gateway Restoring Saved ConﬁgurationOperation & Status System StatusOperation & Status Advanced LAN Conﬁguration Existing Dhcp ServerAdvanced LAN Configuration Static RoutingConﬁguring other Routers on you LAN 192.168.2.0255.255.255.0 192.168.1.100Dimensions Operating TemperatureStorage Temperature External Power AdapterTCP/IP Settings Checking TCP/IP Settings Windows 9x/MEUsing Dhcp Using Specify an IP AddressChecking TCP/IP Settings Windows Using a ﬁxed IP Address Use the following IP AddressChecking TCP/IP Settings Windows XP Figure G. Network Conﬁguration Windows XPTroubleshooting Overview