XiNCOM XC-DPG603 manual Advanced LAN Conﬁguration, Existing Dhcp Server

Page 49

XC-DPG603

Twin WAN DNS → IP

VPN Gateway

Chapter Contents

•Overview

•Existing DHCP Server

•Static Routing

Chapter 11 - Advanced LAN Conﬁguration

Overview

These settings are provided to deal with non-standard situations or to provide additional options for advanced users.

Existing DHCP Server

If your LAN already has a DHCP Server, and you wish to continue using it, the following conﬁguration is required.

The DHCP Server function in the XC-DPG603 must be disabled. This setting is on the LAN & DHCP screen.

Your DHCP Server must be conﬁgured to provide the XC-DPG603’s LAN IP address as the “Default Gateway”. Your DHCP Server must provide correct DNS addresses to the PCs.

49

Image 49

Contents Twin WAN DNS IP VPN Gateway Table of Contents QoS Conﬁguration VPN Conﬁguration Use TWO ISPs for expanded bandwidth and redundancy IntroductionFeatures Password Protected Conﬁguration Easy SetupHttp Firmware Upgrade and backup Dhcp Server SupportSystem Physical DetailsLED Action Condition Default SettingsOverview Procedure Basic SetupProcedure Configuring the XC-DPG603 for your LANNo Response? Configuring the XC-DPG603 for your LAN Installation Diagram for XC-DPG603 Connecting two broadband modemsSettings Primary Setup Connection Mode Configuring for Internet AccessConnection Type Address InfoTCP/IP Settings Configure PCs on your LANInternet Access OverviewFor Linux Clients For Apple ClientsFixed IP Address To act as a Dhcp Client recommendedAdvanced Port Port Options Health Check Auto Dialup Bridge ModeLoad Balance Settings Load BalanceAdvanced PPPoE Settings Advanced PPPoEAdvanced Pptp Settings Advanced PptpAdvanced Setup Host IP Host IPVirtual Servers Settings Virtual ServerVirtual Servers Custom Virtual Servers Settings Custom Virtual ServersCustom Virtual Servers Server ListSpecial Applications Settings Special ApplicationsSpecial Application Settings Dynamic DNS To use the Dynamic DNS FeatureDynamic DNS Dynamic DNSFor Dynamic IP Multi DMZ & UPnPSelect the desired WAN port Private IP AddressAdvanced Features Advanced FeaturesSettings Advanced Features HTTP// Internet IP Address of the XC-DPG603 Using Remote Web-based SetupFirewall Exception Security ManagementSettings Block URL Access FilterSettings Access Filter Block URLSession Limit & Firewall Exception Settings Session LimitSession Limit QoS Conﬁguration How it works VPN ConﬁgurationIPSec Global Setting IPSec Global SettingsVPN Policy Setup Policy SetupKey Management DNS Conﬁguration XC-DPG602 & 603 Gateways How it worksDomain Name Configuration Public WAN 1 & 2 IP Address NS Record Primary/Secondary Name ServerMX Record Mail Exchange Preference 1Record Map Host URLCname Record Host URL ListSystem Information Management AssistantTrap Targets Syslog Conﬁguration Management AssistantMessage Status Updating the Firmware Backup your conﬁguration Using the Tftp Utility RecommendedTo save the XC-DPG603 Conﬁguration to a ﬁle Uploading the Firmware Http Upgrade FirmwareTo upload the ﬁrmware to the Gateway Restoring Saved ConﬁgurationSystem Status Operation & StatusOperation & Status Existing Dhcp Server Advanced LAN ConﬁgurationStatic Routing Advanced LAN Configuration192.168.2.0 Conﬁguring other Routers on you LAN255.255.255.0 192.168.1.100Operating Temperature DimensionsStorage Temperature External Power AdapterChecking TCP/IP Settings Windows 9x/ME TCP/IP SettingsUsing Dhcp Using Specify an IP AddressUsing a ﬁxed IP Address Use the following IP Address Checking TCP/IP Settings WindowsFigure G. Network Conﬁguration Windows XP Checking TCP/IP Settings Windows XPOverview Troubleshooting