Operation & Status
Restore Factory Defaults
When the “Restore Factory Defaults” button on the Status screen above is clicked, the following screen is displayed.
If the “Restore Default Value” button on this screen is clicked:
•ALL of your settings will be erased.
•The default IP address, password and ALL other settings will be restored to the factory default values.
•The DCHP server function will be enabled.
These changes may mean that the current connection is invalid and you will have to
WAN Status
NAT Statistics | This section displays data for each WAN port. |
| Connection status – This will display either Connected or Not |
| Connected. |
| Default Loading Share - The default traffic loading between |
| the WAN ports. |
| Current Loading Share – The current traffic loading between |
| the WAN ports. |
| Current Loading – The number of sessions, Bytes and |
| Packets currently being processed on each port. |
| Current Bandwidth – The current Download and Upload |
| speeds on each WAN port. |
| “Check NAT Detail” will display the NAT Status screen, |
| described below. |
Interface Statistics | This section displays cumulative statistics. |
| Use the “Restart Counter” button to restart these counters when |
| required. |
NAT Status
LAN IP Info | IP Address – The LAN IP Address of the |
| Mask Address – The Network Mask (Subnet Mask) for the IP |
| Address above. |
Active WAN IP Info | There is one (1) row for each active connection. For each |
| connection the following data is shown: |
| IP Address – The WAN (Internet) IP Address of the |
| Mask Address – The Network Mask (Subnet Mask) for the IP |
| Address above |
NAT Timeouts | This displays the current timeout values for TCP and UDP |
| connections. |
TCP Prosperity | This displays the MSS (Maximum Segment Size) and Maximum |
| Windows size for TCP packets. |
NAT Traffic | This section displays statistics for both outgoing (LAN to Internet) |
| and Incoming (Internet to Local) traffic. |
NAT Connections | This displays the current number of active connections. For further |
| details, click the “View Connection” list button. |
Errors | Statistics are displayed for Checksum errors, number of retries, |
| and number of bad packets. |
Misc. | This displays the total IP packets and reserved address. |
48