XiNCOM manual Using the Tftp Utility Recommended, To save the XC-DPG603 Configuration to a file

Page 45

Management Assistant

Admin Password Screen

The password screen allows you to assign a password to the XC-DPG603.

Enter the desired password. Re-enter the password in the Verify Password field and then save it.

When you connect to the XC-DPG603 with your Browser, you will be prompted for the password when you connect, as shown below.

Enter “Admin” for the User Name.

Enter the password for the XC-

DPG603 as set on the Admin

Password screen above.

Upgrade Firmware

Using the TFTP Utility (Recommended)

The XC-DPG603 Twin WAN Gateway supports the Trivial File Transfer Protocol (TFTP). This is mainly used to upload the firmware to the device. It can also be used to save and upload the configuration and reset the Gateway to defaults.

This guide will show you how to perform all those actions along with the proper procedure for upgrading your XC-DPG603 to the latest firmware release.

Updating the Firmware

To update the firmware on your XC-DPG603 you must first download the firmware from the XiNCOM Support web page (http://www.xincom.com/support) You will need an unzipping utility such as WinZip (www.winzip.com) or WinRAR (www.rarlab.com) to extract the contents of the file. Included will be a README file (usually README.txt), TFTP (tftp.exe) utility and the firmware file ({name}. bin).

Backup your configuration

When you update the firmware on the XC-DPG603 the default configuration overwrites any settings that you previously entered into the Gateway. You will need to save the configuration of the file to the Gateway. There are two ways to do this, the TFTP utility and the HTTP user interface. This section covers only the TFTP utility, you can learn how to update using the HTTP utility in the Admin Control section.

To save the XC-DPG603 Configuration to a file:

1.Open the TFTP utility by double clicking on it.

2.Enter the Gateways IP address (Default is: 192.168.1.1)

3.Enter a file name that you would like to save the file as (Example: config-file.bin).

4.Press the Upload button and the file will be saved to the same directory as the TFTP utility.

45

Image 45
Contents Twin WAN DNS IP VPN Gateway Table of Contents QoS Configuration VPN Configuration Use TWO ISPs for expanded bandwidth and redundancy IntroductionFeatures Password Protected Configuration Easy SetupHttp Firmware Upgrade and backup Dhcp Server SupportSystem Physical DetailsLED Action Condition Default SettingsOverview Procedure Basic SetupConfiguring the XC-DPG603 for your LAN ProcedureNo Response? Configuring the XC-DPG603 for your LAN Installation Diagram for XC-DPG603 Connecting two broadband modemsSettings Primary Setup Connection Mode Configuring for Internet AccessConnection Type Address InfoTCP/IP Settings Configure PCs on your LANInternet Access OverviewFor Linux Clients For Apple ClientsFixed IP Address To act as a Dhcp Client recommendedAdvanced Port Port Options Health Check Auto Dialup Bridge ModeLoad Balance Settings Load BalanceAdvanced PPPoE Settings Advanced PPPoEAdvanced Pptp Settings Advanced PptpAdvanced Setup Host IP Host IPSettings Virtual Server Virtual ServersVirtual Servers Custom Virtual Servers Settings Custom Virtual ServersCustom Virtual Servers Server ListSettings Special Applications Special ApplicationsSpecial Application Settings Dynamic DNS To use the Dynamic DNS FeatureDynamic DNS Dynamic DNSFor Dynamic IP Multi DMZ & UPnPSelect the desired WAN port Private IP AddressAdvanced Features Advanced FeaturesSettings Advanced Features HTTP// Internet IP Address of the XC-DPG603 Using Remote Web-based SetupFirewall Exception Security ManagementSettings Block URL Access FilterSettings Access Filter Block URLSettings Session Limit Session Limit & Firewall ExceptionSession Limit QoS Configuration How it works VPN ConfigurationIPSec Global Setting IPSec Global SettingsVPN Policy Setup Policy SetupKey Management DNS Configuration XC-DPG602 & 603 Gateways How it worksDomain Name Configuration Public WAN 1 & 2 IP Address NS Record Primary/Secondary Name ServerMX Record Mail Exchange Preference 1Record Map Host URLCname Record Host URL ListManagement Assistant System InformationTrap Targets Management Assistant Syslog ConfigurationMessage Status Using the Tftp Utility Recommended Updating the Firmware Backup your configurationTo save the XC-DPG603 Configuration to a file Uploading the Firmware Http Upgrade FirmwareTo upload the firmware to the Gateway Restoring Saved ConfigurationSystem Status Operation & StatusOperation & Status Existing Dhcp Server Advanced LAN ConfigurationStatic Routing Advanced LAN Configuration192.168.2.0 Configuring other Routers on you LAN255.255.255.0 192.168.1.100Operating Temperature DimensionsStorage Temperature External Power AdapterChecking TCP/IP Settings Windows 9x/ME TCP/IP SettingsUsing Dhcp Using Specify an IP AddressUsing a fixed IP Address Use the following IP Address Checking TCP/IP Settings WindowsFigure G. Network Configuration Windows XP Checking TCP/IP Settings Windows XPOverview Troubleshooting