XiNCOM XC-DPG603 NS Record Primary/Secondary Name Server, Public WAN 1 & 2 IP Address, Location

Page 41

Domain Name Configuration

NS Record

Primary/Secondary Name Server

This holds the settings for the domain. This setting is usually obtained locally rather than a remote source.

Public WAN (1 & 2) IP Address

This sets the public IP address for the domain name on the specified WAN Port.

MX Record

Mail Exchange

This sets the mail route for the domain name.

Preference (1 & 2)

This sets the route preference. The lower number will have the higher priority.

Location

This sets the location for either the public or private IP.

IP Address

The user can set the IP address of the public or private mail server.

41

Image 41
Contents Twin WAN DNS IP VPN Gateway Table of Contents QoS Configuration VPN Configuration Use TWO ISPs for expanded bandwidth and redundancy IntroductionFeatures Password Protected Configuration Easy SetupHttp Firmware Upgrade and backup Dhcp Server SupportSystem Physical DetailsLED Action Condition Default SettingsOverview Procedure Basic SetupNo Response? Configuring the XC-DPG603 for your LANProcedure Configuring the XC-DPG603 for your LAN Installation Diagram for XC-DPG603 Connecting two broadband modemsSettings Primary Setup Connection Mode Configuring for Internet AccessConnection Type Address InfoTCP/IP Settings Configure PCs on your LANInternet Access OverviewFor Linux Clients For Apple ClientsFixed IP Address To act as a Dhcp Client recommendedAdvanced Port Port Options Health Check Auto Dialup Bridge ModeLoad Balance Settings Load BalanceAdvanced PPPoE Settings Advanced PPPoEAdvanced Pptp Settings Advanced PptpAdvanced Setup Host IP Host IPVirtual Servers Settings Virtual ServerVirtual Servers Custom Virtual Servers Settings Custom Virtual ServersCustom Virtual Servers Server ListSpecial Application Settings Special ApplicationsSpecial Applications Settings Dynamic DNS To use the Dynamic DNS FeatureDynamic DNS Dynamic DNSFor Dynamic IP Multi DMZ & UPnPSelect the desired WAN port Private IP AddressSettings Advanced Features Advanced FeaturesAdvanced Features HTTP// Internet IP Address of the XC-DPG603 Using Remote Web-based SetupFirewall Exception Security ManagementSettings Block URL Access FilterSettings Access Filter Block URLSession Limit Settings Session LimitSession Limit & Firewall Exception QoS Configuration How it works VPN ConfigurationIPSec Global Setting IPSec Global SettingsVPN Policy Setup Policy SetupKey Management DNS Configuration XC-DPG602 & 603 Gateways How it worksDomain Name Configuration Public WAN 1 & 2 IP Address NS Record Primary/Secondary Name ServerMX Record Mail Exchange Preference 1Record Map Host URLCname Record Host URL ListTrap Targets Management AssistantSystem Information Message Status Management AssistantSyslog Configuration To save the XC-DPG603 Configuration to a file Using the Tftp Utility RecommendedUpdating the Firmware Backup your configuration Uploading the Firmware Http Upgrade FirmwareTo upload the firmware to the Gateway Restoring Saved ConfigurationSystem Status Operation & StatusOperation & Status Existing Dhcp Server Advanced LAN ConfigurationStatic Routing Advanced LAN Configuration192.168.2.0 Configuring other Routers on you LAN255.255.255.0 192.168.1.100Operating Temperature DimensionsStorage Temperature External Power AdapterChecking TCP/IP Settings Windows 9x/ME TCP/IP SettingsUsing Dhcp Using Specify an IP AddressUsing a fixed IP Address Use the following IP Address Checking TCP/IP Settings WindowsFigure G. Network Configuration Windows XP Checking TCP/IP Settings Windows XPOverview Troubleshooting