XiNCOM Complete Guide to Managing Your Network Card

XC-DPG603

Twin WAN DNS → IP

VPN Gateway

Chapter Contents

•SNMP

•Email Alert

•Syslog

•Upgrade Firmware

Chapter 9 - Management Assistant

SNMP - Simple Network Management Protocol

This section is to compliment any SNMP (Simple Network Management Protocol) software installed on your PC. If you have SNMP software, you can use a standard MIB II file with the XC-DPG603.

Settings - SNMP

System Information

•Contact Person - The name of the person responsible for this device

•Device Name - Enter a name for the XC-DPG603

•Physical Location - The location of the XC-DPG603

Trap Targets

Enter the IP address of any targets (PCs running SNMP software) to which you want traps to be sent. All traps are level 1.

Email Alert

The email alert feature will send an warning email to the system administrator and inform that one of the WAN ports was disconnected.

Email Alert	• Enable – This will enable email alert to send an warning email when WAN port was disconnected.
	• Disable – This will disable email alert not to send an warning email when WAN port was
	disconnected.
Email Sender Address	Email Sender Address
	An email address that sends a warning email to a recipient. The warning email will inform the
	recipient if there is any problem on either or both WAN ports.
	Email (SMTP) Server Address
	This sets the email server to where the warning email will be sent to.
	For example: mail.domain.com.
	Email (SMTP) server user name
	This authenticates the user name of email sender (optional).
	Email (SMTP) server password	43
	This is the user password