XiNCOM XC-DPG603 manual Features

Features

Figure 1. How it works

Built-in VPN Endpoint

Full VPN Endpoint with support for up to 50 VPN tunnels using the IPsec encryption protocol.

Internet

Figure 2. Load Balancing

1A client computer makes a request to access www.(yourdomain).com.

2The request goes to the ISP’s DNS server and the DNS server replies with the IP address of the DNS responsible for that domain.

3The request is then processed by the Authoritative DNS of that domain and provides the IP address of the specified server.

4The client can then access the web server.

Authoritative DNS to IP Gateway

The XC-DPG603 is an authoritative DNS to IP gateway that resolves a domain name to its respective IP addresses. This new capability allows for inbound failover and load balancing for servers located behind the gateway. Using dual WAN ports simultaneously increases available bandwidth for both uploads and download requests. You can set load balance type by Packets, Bytes rx+tx and Sessions.

Multiple Connection Methods

All popular DSL and Cable Modems and connection methods are supported, including Fixed IP, Dynamic IP, PPPoE, even multiple-session PPPoE.

2 x 10/100 WAN Ports

The XC-DPG603 incorporates dual 10/100 WAN ports, complete with auto-crossover for easy connection to an existing network. All popular DSL and Cable Modems and connection methods are

Load Balance two concurrent broadband connections in any combination to expand a network’s bandwidth to the Internet. The XC-DPG603 supports T1, xDSL, Cable, and Satillite broadband connections.

Active connection from the ISP

The XC-DPG603 load balances both inbound and outbound traffic requests.

Figure 3. Automatic Fail-over

In the event of one connection going down, all traffic is re-routed to the second WAN port utilizing the live broadband connection from the second ISP. This provides true redundancy to ensure a network remains connected to the Internet.

Active connection from the ISP

Inactive connection from the ISP

All incoming and outgoing traffic from a LAN has an uninterrupted connection to the Internet when one of the two connections fail.

supported, including Fixed IP, Dynamic IP, PPPoE, even multiple-session PPPoE.

4-Port 10/100 Switch

The XC-DPG603 incorporates a 4-port 10/100 N-Way Ethernet Switch, complete with auto crossover for easy connection to an existing network.

Automatic Fail-over

If one broadband connection goes down all traffic is automatically re-routed through the second broadband connection.

Stateful Packet Inspection (SPI) Firewall

Protects your network using advanced SPI against malicious and DDoS attacks.

Advanced NAT features

Access Filters, DMZ, DDNS, Remote Management, Dynamic or Static Routing, Special Applications, Virtual Servers, SNMPv1.

Access Filter

Gain fine control over the Internet access and applications available to LAN users with a powerful URL Blocking Engine. Five (5) user groups are available, and each group can have different access rights.

Block URL

Use this feature to block access to undesirable Web sites by LAN users. You can even have different settings for different groups of PCs.

5