Panasonic CF-VDW07BH specifications For U.K, How to replace the fuse

Page 6

For U.K.

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY

This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 3 amp fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 3 amps and that it is approved by ASTA or BSI to BS 1362.

Check for the ASTA mark A S A or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer.

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.

THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMP SOCKET.

If a new plug is to be fitted please observe the wiring code as shown below. If in any doubt please consult a qualified electrician.

Important

The wires in this mains lead are coloured in accordance with the following code:

Blue: Neutral

Brown: Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured RED.

Under no circumstances should either of these wires be connected to the earth terminal of

the three pin plug, marked with the letter E or the Earth Symbol

 

 

 

 

.

 

 

 

 

The mains plug on this equipment must be used to disconnect the mains power.

Please ensure that a socket outlet is available near the equipment and shall be easily accessible.

How to replace the fuse

Open the fuse compartment with a screwdriver and replace the fuse.

Warnings

This equipment is not designed for connection to an IT power system.

(An IT system is a system having no direct connections between live parts and Earth; the exposed-conducive-parts of the electrical installation are earthed.

An IT system is not permitted where the computer is directly connected to public supply systems in the U.K.)

Disconnect the mains plug from the supply socket when the computer is not in use.

6This equipment is produced to BS800/1983.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents CF-VDW07BH Declaration of Conformity DoC This product and your HealthRegulatory Information Compliance Notice CE MarkKonformitätserklärung Declaration of Conformity, DoC Dieses Produkt und Ihre GesundheitRegulative Information Konformitätserklärung CE-ZeichenInformations sur la réglementation Pour la FranceCet appareil et votre santé Déclaration de conformitéFor U.S.A For CanadaIndustry Canada How to replace the fuse For U.KPrecautions Battery Pack Precaution Avoiding low-temperature burnsVorsichtsmaßnahmen Batteriepackung Vorsichtsmaßnahme Niedertemperatur-Verbrennungen vermeidenPrécautions concernant la batterie Précaution Evitez les brûlures à basse températureEnglish Operating InstructionsFront First-time OperationNames and Functions of Parts Attaching the strapSerial Port Stylus Battery Pack Removing the stylus BottomInstall Software Keyboard Install MeiWDS Program/Software KeyboardInstall MeiWDS program First-time OperationInstall the Serial Port Driver of the Wireless Display Limitation when using the serial port Setup the Wireless DisplayLatch Tab Wireless display screen TCP/IPWhen using the CF-07 series computer Starting Up/Shutting DownStarting Up Select your application When Windows is shutting down is displayed, select OkShutting Down Display the shut down screenDouble-clicking TouchscreenMoving the cursor Clicking DraggingRight-Clicking Handling the TouchscreenHandling the Stylus ButtonPress Menu button Select Option Select Calibration TouchscreenCalibration Menu ButtonSoftware Keyboard Changing the Settings Software KeyboardBattery Power Battery StatusBattery Power Getting a detailed reading Press Menu button Select Battery.Replacing the Battery Pack Power off your wireless display.Taking out the battery pack Charging the Battery Pack Inserting a battery packConnector Tab Setting the Wireless Display Wireless MenuGeneral Menu Setting the Wireless Display Battery MenuOption Menu Version Menu Changing the Wireless Display Settings Wireless Display Setup UtilityChanging the Wireless Display Settings MeiWDS Setup Utility Press Capture button Capturing the ScreenDisplaying Saved Images Capture ButtonTroubleshooting Troubleshooting Specifications Memo Deutsch BatteriepackungVorderseite Erste InbetriebnahmeBezeichnungen und Funktionen der Teile Anbringen des GurtesGleichstrom-Eingangsbuchse UnterseiteEntfernen des Stifts Serieller Anschluß StiftBatteriepackungInstallation des MeiWDS-Programms Installation der Software-TastaturErste Inbetriebnahme Windows XP Erste Inbetriebnahme Einstellen des drahtlosen Displays Drahtloser DisplaybildschirmSsid Starten/Abschalten StartenStarten/Abschalten AbschaltenBerührungsempfindlicher Bildschirm Bewegen des Cursors KlickenDoppelklicken Ziehen und Ablegen Berührungsempfindlicher Bildschirm Klicken mit der rechten MausHinweise zur Handhabung des Stifts KalibrierungSoftware-Tastatur CtrlÄndern der Einstellungen Batteriestrom Batterie-StatusMenü-Taste Schalten Sie das drahtlose Display aus Seite BatteriestromErsetzen der Batteriepackung Herausnehmen der BatteriepackungLaden der Batteriepackung Einsetzen einer BatteriepackungAnschlussstecker Lasche „Wireless-Menü Einstellen des drahtlosen Displays„General-Menü „Battery-Menü Einstellen des drahtlosen Displays„Option-Menü Geben Sie das Supervisor„Version-Menü Änderung der Einstellungen des drahtlosen Displays Hinweis MeiWDS Setup Utility Drücken Sie die Erfassungstaste BildschirmerfassungAnzeigen von gespeicherten Bildern ErfassungstasteStörungsbeseitigung Oder „Initial image Receiving timeout wird„Illegal data received Die Software-TastaturTechnisch Daten Ecran Déporté Sans Fil Adaptateur Secteur Cordon SecteurDeavant Première utilisationNoms et fonctions des pièces Fixation de la courroiePrise DC-IN DessousRetrait du stylet Stylet BatterieInstallez le clavier logiciel Installez le programme MeiWDS et le clavier logicielInstallez le programme MeiWDS Première utilisationWindows XP Limitations lors de l’utilisation du port série Écran déporté sans fil affichage Configuration de l’écran déporté sans filConnecteur Languette Commutateur d’alimentationTCP/IP Mise en marche/Arrêt Mise en marcheMise en marche/Arrêt ArrêtDouble-clic Déplacement du curseurEcran tactile GlisserManipulation du stylet Ecran tactileManipulation de l’écran tactile Clic droitEtalonnage Bouton MenuClavier logiciel Modification des paramètres Alimentation par batterie Etat de la batterieBouton Menu Mettez hors tension votre écran déporté sans fil. Remplacement de la batterieAlimentation par batterie Retrait de la batterieConnecteur Charge de la batterieIntroduction d’une batterie LanguetteMenu Wireless Menu GeneralMenu Battery En sélectionnant Battery, l’état de la batterie est affichéConfiguration de l’écran déporté sans fil Menu OptionMenu Version Page Remarque Remarque Appuyez sur le bouton Capture Capture de l’écranAffichage des images enregistrées Bouton CaptureDépannage I n i t i a l A g e Receiving timeout estIllegal data received Le clavier logiciel a étéSpécifications Mémo 103FJ0804-0 DFQX5473ZA

CF-VDW07BH specifications

The Panasonic CF-VDW07BH is a significant addition to the realm of rugged mobile computing, designed to meet the needs of professionals who require reliability in extreme conditions. As part of the Toughbook series, this device is widely recognized for its durability, performance, and versatility.

One of the most notable features of the CF-VDW07BH is its robust construction. This device is built to withstand harsh environments, featuring a rugged design that is compliant with MIL-STD-810G standards. It can endure drops, vibrations, humidity, and extreme temperatures, making it ideal for fieldwork in the military, emergency services, and other demanding industries.

Equipped with a high-resolution display, the CF-VDW07BH ensures excellent visibility under various lighting conditions, including direct sunlight. The screen is designed for touch functionality, allowing for quick and intuitive interaction. This feature is particularly beneficial for users working in high-paced or field scenarios where using a stylus or keyboard may not be feasible.

Performance-wise, the CF-VDW07BH is powered by Intel’s high-performance processors, delivering speedy operations and multitasking capabilities. Coupled with ample RAM and storage options, users can seamlessly run demanding applications and manage large datasets without lag.

The device boasts extensive connectivity options, including Wi-Fi, Bluetooth, and optional mobile broadband, ensuring that users remain connected in the field. This feature is crucial for professionals relying on real-time data access and communication while on the move.

Security is also a top priority for the CF-VDW07BH. It includes multiple layers of security features to protect sensitive data, such as biometric authentication and hardware-based encryption. This makes it a suitable choice for sectors that require stringent data protection measures.

In summary, the Panasonic CF-VDW07BH is a rugged laptop that incorporates advanced technologies and features designed for professionals who operate in challenging environments. With its durability, powerful performance, and comprehensive connectivity and security options, this device stands out as an excellent solution for users demanding reliability and efficiency in their mobile computing needs. Whether in the field or during critical operations, the CF-VDW07BH is engineered to perform, ensuring professionals can carry out their tasks with confidence.
Top Page Image Contents