Panasonic KX-HGC200 operating instructions TroubleshootingÒ, Problem Remedy

TroubleshootingÒ

Problem	Remedy
When you insert	³ The KX-HGC200 may not be inserted
KX-HGC200 to the PC card	properly. Insert it again firmly to the
slot, the Install wizard	end.
screen is not displayed.	³ The PC card socket may not be
The computer does not	working properly. After checking its
	operation, insert KX-HGC200 again
operate even if you insert
	firmly to the end.
KX-HGC200.
	³ The Power Management Function
	(automatic shutoff function) of the
	computer may disturb the power
	supply to KX-HGC200. Confirm the
	function according to the manual of
	the computer.
	³ The cancellation of the device driver
	installation has left some driver files in
	the computer.It hinders the
	re-installation of the device driver.
	Un-install the KX-HGC200 software
	completely by using the un-installation
	software which was installed during
	the installation of the KX-HGC200
	device driver.
You cannot install the	³ KX-HGC200 may not be inserted
KX-HGC200 device driver.	properly. Insert it again firmly to the
	end.
	³ The PC card socket may not be
	working properly. Check its operation.

Appendix

The Network management web screen is not displayed.

You cannot connect with the computer.

You cannot connect with the Broadband Networking Gateway.

³KX-HGC200 may not be inserted properly. Insert it again firmly to the end.

³The PC card socket may not be working properly. Check its operation.

³The version of the firmware of the Broadband Networking Gateway may be old or improper to that of KX-HGC200. Check each versions.

For assistance, please call: 1-800-272-7033

69