Panasonic UF-7200 manual Installing Your Machine

Page 25

Installing Your Machine

Optional Telephone Handset Jack or External Telephone Jack

Connect the Telephone Line Cable from the Optional Handset Kit into the HANDSET jack on the back of the machine.

or

You can connect an additional standard single line telephone to the machine. To connect a telephone,

remove the protective tab on the TEL jack.

RJ-11C

Telephone Jack

Handset Kit (Optional)

Optional 2nd Telephone Line Jack

(Optional G3 Communication Port Kit (UE-407029) is required.)

Telephone Line Jack

Plug one end of the Telephone Line Cable into the telephone jack supplied by the telephone company and the other end into the LINE jack on the back of the machine.

ENGLISH

(UE-403185)

POWER

(Some models may have the Power Switch.)

Power Cord (Included)

(Service use only)

LAN Cable

(10BASE-T/100BASE-TX Cable)

Insert the plug until a click is heard.

(LAN cable is not included with the product.) Purchase a Category 5 Cable, compliant with EIA/TIA 568-A-5 standard.

10BASE-T/100BASE-TX Ethernet Hub

Ethernet LAN

(10BASE-T/100BASE-TX Cable not included)

USB Port

See Operating Instructions

(For Document Management

System)

RX Lamp (orange)

Blinks when there is data traffic on the LAN.

LAN Connection Jack (10BASE-T/100BASE-TX)

LINK Lamp (green)

Illuminates when connected to the LAN.

Lamp will not turn ON if LAN

cable is defective (contains breaks).

NOTE

1.Please observe the standards for USB cables.There is a danger that circuit board could be damage by voltage difference. It is recommended that identical cable taps be used to supply power.

25

Image 25

Contents For Basic Operations Operating InstructionsModel No. UF-8200 „ Functions and Options Operating InstructionStandard Option Operating Instruction How to Read This ManualFollowing notations are used throughout this manual Table of Contents For Your Safety Safety InformationPower and Ground Connection Cautions Consumable Safeguards Operating SafeguardsSafety Information Others Installation and Relocation CautionsSafety Information For Your Safety PrecautionInstallation SuppliesVentilation PrecautionHandling „ Caution Label Precaution „ Laser SafetyImportant Safety Instruction Security Suggestions for Key Operators Telephone Line Cable Power Cord Directory Sheet Holder Main Unit and AccessoriesOperating Instructions Recording Paper TrayExternal View Control Panel Control Panel „QWERTY Keyboard Character Keyboard Icon Contents „Status LED RED „Print Data LED GreenUnpacking Installing Your MachineUnpacking Remove All Shipping Tapes and All Packing MaterialsPull out the tray until it stops Load PaperFor Tray-1/Tray2 Unpacking Install the Toner Cartridge Unpacking Optional Telephone Handset Jack or External Telephone Jack Installing Your MachineEnter the Key Operator ID using the Number Pad, then press Setting the Dialing Method Tone or PulseFor Pulse For ToneSetting the Monitor Volume Adjusting the VolumeAdjusting the Volume Setting the Ringer VolumeUser Parameters For Facsimile Setting the User ParametersEx Panasonic User Parameters For FacsimileEx Head Office Ex 201 555Programming Auto Dialer Setting Your MachineScanning Area How to Place DocumentsDocument Size Document WidthManual Number Dialing Sending DocumentsSending Documents Quick Name Search Dialing„ Sending Email What is Internet Fax?„ Receiving Email „ RoutingWhat is Internet Fax? Using the Internet Fax FeatureUser Information Internet Paramaters User ParametersEx InternetFax@fax01.panasonic.com Internet Paramaters User Parameters for IPv6 environmentAdding Paper Paper Trays Tray-1 and Tray-2 Replacing ConsumablesInsert the tray into the machine until it stops Replacing Consumables„ Low Toner message will follow this progression Replacing the Toner CartridgeOpen the Right Cover of the machine „ Replacing the Toner CartridgePush up the Cartridge, and then pull it out Insert the Toner Cartridge until it stops, Replacing Consumables If You Have Any of These Problems Problem SolvingMode Symptom Cause / Action Problem Solving „ Jam Error Codes J Code UserU / JamJ Error Codes„ User Codes U Code „For J01, J02 Removing a Misfed Paper Paper Feed/Paper Transport„ When the optional Tray-2 is installed „For J43, J44 Removing a Misfed Paper Inside the MachineThen push it down „For J71, J72, J74, J75, J92, J93 Removing a Misfed Document ADFInfo Meaning Possible Action Code Information CodeMachine will only redial once Problem Solving English FCC Notice for Users in USA FCC NoticeDate and Time FCC NoticeID Number FCC Notice Avis Memo Important Information For Service, Call Warranty