Panasonic UF-7200 manual Replacing Consumables, Insert the tray into the machine until it stops

Page 39

Replacing Consumables

5 Make sure that the paper is set properly and it

does not exceed the Max. Level Indicator.

ENGLISH

6 Insert the tray into the machine until it stops.

NOTE

1.When the optional Tray-2 is installed and the same size of paper is loaded in both trays, the paper will be supplied from Paper Tray-1 first. This is the default setting, if you wish to change the setting, please consult with your authorized Pana- sonic dealer.

2.After setting the maximum allowed number of copies for each department, consult with your Key Operator when the total copy count reaches the designated limit and the "MAX COPIES ALLOWED" message appears on the LCD.

3.If output sheets are curled, or not properly aligned, remove the paper from the paper tray, turn it over, and replace it in the paper tray.

39

Image 39

Contents Operating Instructions For Basic OperationsModel No. UF-8200 Operating Instruction „ Functions and OptionsStandard Option How to Read This Manual Operating InstructionFollowing notations are used throughout this manual Table of Contents Safety Information For Your SafetyPower and Ground Connection Cautions Operating Safeguards Consumable SafeguardsSafety Information Others Installation and Relocation CautionsSafety Information Supplies PrecautionFor Your Safety InstallationPrecaution VentilationHandling „ Caution Label Precaution „ Laser SafetyImportant Safety Instruction Security Suggestions for Key Operators Recording Paper Tray Main Unit and AccessoriesTelephone Line Cable Power Cord Directory Sheet Holder Operating InstructionsExternal View Control Panel Control Panel „QWERTY Keyboard Character Keyboard Icon Contents „Status LED RED „Print Data LED GreenUnpacking Installing Your MachineUnpacking Remove All Shipping Tapes and All Packing MaterialsLoad Paper Pull out the tray until it stopsFor Tray-1/Tray2 Unpacking Install the Toner Cartridge Unpacking Optional Telephone Handset Jack or External Telephone Jack Installing Your MachineFor Tone Setting the Dialing Method Tone or PulseEnter the Key Operator ID using the Number Pad, then press For PulseSetting the Monitor Volume Adjusting the VolumeAdjusting the Volume Setting the Ringer VolumeUser Parameters For Facsimile Setting the User ParametersEx 201 555 User Parameters For FacsimileEx Panasonic Ex Head OfficeProgramming Auto Dialer Setting Your MachineDocument Width How to Place DocumentsScanning Area Document SizeManual Number Dialing Sending DocumentsSending Documents Quick Name Search Dialing„ Routing What is Internet Fax?„ Sending Email „ Receiving EmailInternet Paramaters User Parameters Using the Internet Fax FeatureWhat is Internet Fax? User InformationEx InternetFax@fax01.panasonic.com Internet Paramaters User Parameters for IPv6 environmentAdding Paper Paper Trays Tray-1 and Tray-2 Replacing ConsumablesInsert the tray into the machine until it stops Replacing Consumables„ Low Toner message will follow this progression Replacing the Toner Cartridge„ Replacing the Toner Cartridge Open the Right Cover of the machinePush up the Cartridge, and then pull it out Insert the Toner Cartridge until it stops, Replacing Consumables Problem Solving If You Have Any of These ProblemsMode Symptom Cause / Action Problem Solving UserU / JamJ Error Codes „ Jam Error Codes J Code„ User Codes U Code „For J01, J02 Removing a Misfed Paper Paper Feed/Paper Transport„ When the optional Tray-2 is installed „For J43, J44 Removing a Misfed Paper Inside the MachineThen push it down „For J71, J72, J74, J75, J92, J93 Removing a Misfed Document ADFInfo Meaning Possible Action Code Information CodeMachine will only redial once Problem Solving English FCC Notice for Users in USA FCC NoticeFCC Notice Date and TimeID Number FCC Notice Avis Memo Important Information For Service, Call Warranty