Panasonic Official Troubleshooting Guide for UF-7200 User and Jam Errors

Page 46

Problem Solving

User(U) / Jam(J) Error Codes

1234

U20

U16

U13

U06

U07

User Codes (U Code)

Code	Check Points	Code	Check Points

U06	Right Cover is open.	U16	Toner Cartridge is not installed correctly.

U07	Jam Cover is open.	U20	ADF Cover is open.

U13	Low Toner or Out of Toner. (See page 40)

Jam Error Codes (J Code)

	Code	Check Points	Code	Check Points

	J01,	Remove the jammed paper from the tray(s).	J71,	Remove document(s) in the ADF. (See page
	J02	(See page 47)	J72,	51)
		Check to make sure the Paper Guides are	J74
		properly adjusted in the tray(s). (Refer to	J75,
		the Operating Instructions (For Advanced	J92,
		Operations) on the provided CD-ROM)	J93

	J43,	Remove misfed paper(s) inside the
	J44	machine. (See page 49)

NOTE

1.The J## Code indicates the most probable Jam location. If the jam message reappears after the jam is cleared, paper is most likely jammed at other location(s). Check the Jam Error Codes Table above for other check points and remove all misfed paper.

2.Make sure that the Jam Error Code disappears after removing the misfed paper.

3.The Jam Error Code will not disappear if the paper is still jammed in the machine. Check again and remove all misfed paper.

4.When the Machine Error Code (E Code) (for service personnel) appears on the display, reset the machine by first unplug- ging the power cord of the machine from the wall outlet. Wait for a few seconds and plug the power cord of the machine in the wall outlet again. If the E Code reappears, contact your local Panasonic Authorized Dealer.

46

Image 46

Contents For Basic Operations Operating InstructionsModel No. UF-8200 „ Functions and Options Operating InstructionStandard Option Operating Instruction How to Read This ManualFollowing notations are used throughout this manual Table of Contents For Your Safety Safety InformationPower and Ground Connection Cautions Consumable Safeguards Operating SafeguardsSafety Information Installation and Relocation Cautions OthersSafety Information Installation PrecautionFor Your Safety SuppliesVentilation PrecautionHandling Precaution „ Laser Safety „ Caution LabelImportant Safety Instruction Security Suggestions for Key Operators Operating Instructions Main Unit and AccessoriesTelephone Line Cable Power Cord Directory Sheet Holder Recording Paper TrayExternal View Control Panel Control Panel Icon Contents „Status LED RED „Print Data LED Green „QWERTY Keyboard Character KeyboardInstalling Your Machine UnpackingRemove All Shipping Tapes and All Packing Materials UnpackingPull out the tray until it stops Load PaperFor Tray-1/Tray2 Unpacking Install the Toner Cartridge Unpacking Installing Your Machine Optional Telephone Handset Jack or External Telephone JackFor Pulse Setting the Dialing Method Tone or PulseEnter the Key Operator ID using the Number Pad, then press For ToneAdjusting the Volume Setting the Monitor VolumeSetting the Ringer Volume Adjusting the VolumeSetting the User Parameters User Parameters For FacsimileEx Head Office User Parameters For FacsimileEx Panasonic Ex 201 555Setting Your Machine Programming Auto DialerDocument Size How to Place DocumentsScanning Area Document WidthSending Documents Manual Number DialingQuick Name Search Dialing Sending Documents„ Receiving Email What is Internet Fax?„ Sending Email „ RoutingUser Information Using the Internet Fax FeatureWhat is Internet Fax? Internet Paramaters User ParametersInternet Paramaters User Parameters for IPv6 environment Ex InternetFax@fax01.panasonic.comReplacing Consumables Adding Paper Paper Trays Tray-1 and Tray-2Replacing Consumables Insert the tray into the machine until it stopsReplacing the Toner Cartridge „ Low Toner message will follow this progressionOpen the Right Cover of the machine „ Replacing the Toner CartridgePush up the Cartridge, and then pull it out Insert the Toner Cartridge until it stops, Replacing Consumables If You Have Any of These Problems Problem SolvingMode Symptom Cause / Action Problem Solving „ Jam Error Codes J Code UserU / JamJ Error Codes„ User Codes U Code Removing a Misfed Paper Paper Feed/Paper Transport „For J01, J02„ When the optional Tray-2 is installed Removing a Misfed Paper Inside the Machine „For J43, J44Then push it down Removing a Misfed Document ADF „For J71, J72, J74, J75, J92, J93Information Code Info Meaning Possible Action CodeMachine will only redial once Problem Solving English FCC Notice FCC Notice for Users in USADate and Time FCC NoticeID Number FCC Notice Avis Memo Important Information Warranty For Service, Call