Panasonic CF-VDW07M, CF-VDW07HM configurationmanual Panasonic Wireless Display Configuration Manual

Page 15

2.Select [Connect] on the Wireless Display. The display will attempt to establish connection with the computer. If the connection is successful, the MeiWDS icon in the "System Tray" will change from to.

3.Click [Start] - [Programs] - [Panasonic] - [Wireless Display Setup Utility] to launch the "Wireless Display Setup Utility". The following window will appear and prompt for password.

This screen is a sample.

4.No default password is set for the "Wireless Display Setup Utility". Leave the field blank and click [OK]. The wndow as shown on the right will appear. Settings changed in this window will be updated in the Wire- less Display.

The check in this box indicates that [Profile 1] is the current active pro- file.

This screen is a sample.

5.[Profile 1], which is the current active profile, contains settings for the AdHoc Mode. Please write down the IP addresses in both "PC IP Addess" and "Display IP Ad- dress" fields as they will be need later.

In the "Profile" drop-down menu, select [Profile 2], the window as shown below will appear. We will setup [Profile 2] for Infrastructure Mode and then enable [Profile 2] as the current active profile.

NOTE

It is also possible to modify [Profile 1] to become Infrastructure Mode; however, doing so, the AdHoc Mode settings will be lost.

This screen is a sample.

 

 

 

Panasonic Wireless Display Configuration Manual

12

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Wireless Display Configuration Manual Introduction Table of Contents First-time Operation Install MeiWDS programSoftware Installation Install Software KeyboardIInstall the Serial Port Driver of the Wireless Display Get the Information You Need AdHoc Mode ConfigurationTabs Create a Profile for the 802.11b Network Adapter This screen is a sample IInput the IP Address IVReady to Connect To disable the Fast User Switching function Setup Infrastructure Directly Infrastructure Mode ConfigurationConfigure from AdHoc mode to Infrastructure mode Setup the Wireless Display in AdHoc ModeMatch the Displays Settings with the Access Point Panasonic Wireless Display Configuration Manual Infrastructure Mode Configuration ISetup the Wireless Network Adapter to Infrastructure Mode IVReady to Connect To Disable the Password field on System Tray Using the MeiWDS Setup UtilityTo change the MeiWDS Setup Utility Password To change the AES Encryption Key LifetimeTo change the AES key of the host PC side Changing Wireless Display Settings To change the Wireless Displays SsidTo change the TCP/IP address IV To change the Profile Name ITo change MeiWDS System Tray PasswordTo change Wireless Display Setup Utilitys Password Auto Move Using the Software KeyboardTransparent IUninstalling the Wireless Display Serial Port driver Uninstalling the SoftwareUninstalling the Software Keyboard Uninstalling the MeiWDS programUsage Precautions Limited USE License Agreement Term
Top Page Image Contents