First-time Operation, Install MeiWDS program

First-time Operation

This manual will walk you through the configurations of the Wireless Display with your computer. In the package, please find the following items as shown in the figure below. If any of these items is missing or not working properly, please contact Panasonic Technical Support.

NOTE

When installing software in a computer without the CD-ROM drive or PCMCIA slot, copy all files in the Wireless Display Software CD to the hard disk, then install the software from the hard disk.

In this manual, "L" is the CD-ROM drive letter and "x" denotes a numeral. You can change these letters to suite your preference.

When using Windows 2000 and Windows XP please logon as the administrator.

NOTE

Depending on the wireless network card you use, the Wireless Display might not function properly with you computer. The following wireless network cards are rec- ommended when using with the Wireless Display.

-Intel(R) PRO/Wireless LAN 2100 3B Series

-Proxim Orinoco 802.11b Silver/Gold Series

-Cisco Aironet 340/350 Series

-Symbol Spectrum24 Series

Depending on the capability of your computer's video chip-set, the Wireless Display might not function properly with your computer. Please consult this with your system administrator or the reseller.

Install the necessary Software

I Install MeiWDS program:

1.Select [Start] - [Run], input [L:\meiwds\setup.exe] and select [OK]. Follow the on- screen instructions.

2.Restart the computer.

3.After restart, the Wireless Display Setup Utility (MeiWDS) icon will appear on the System Tray.

1	Panasonic Wireless Display Configuration Manual