Panasonic CF-VDW07HM, CF-VDW07M configurationmanual Infrastructure Mode Configuration

Infrastructure Mode Configuration

A

B

D

E

H

C

F

G

This screen is a sample.

5.A Enter the SSID of your Access Point.

B Change the network type to [Infrastructure].

C Enter the PC IP address, Display IP address, and Subnet mask. [ P.12-(4)] D Enable the WEP to [64 bits]. (If your Access Point does not uses WEP or use

128 bits encryption, change the "WEP" to [Disabled] or [128 bits] respectively.)

EClick the [Key(s)...] button. The window shown below will appear. Enter the WEP key of your Access Point here. Set the "Default Key" to the one you wish to use. Click [OK] to exit out of the window.

FEnable the AES to [128 bits]. (If you do not want to use AES encryption, use 192 bits encryption, or use 256 bits encryption, change the "AES" to [Disabled], [192

bits], or [256 bits] respectively. )

GClick the [Key...] button. The window as shown below will appear. To use phrase generated AES key, select "Phrase" and enter a phase in the box. To enter the AES key directly, select "Binary" and enter your AES key in the box. Click [OK] to exit out of the window.

HCheck the "Use this profile now" box so that "Profile 2" will become the active profile after the setup is completed.

13 Panasonic Wireless Display Configuration Manual