Panasonic CF-VDW07HM, CF-VDW07M Configure from AdHoc mode to Infrastructure mode

Page 14

Infrastructure Mode Configuration

4.Enter the SSID as shown on the Wireless Dis- play. [ P.10-(2)]

5.Follow steps 11 and 12 on page 6 and 7 to exit out of the configuration utility. [ P.6- (11~12)]

This screen is a sample.

IInput the IP Address:

6.Follow steps 13 through 19 on pages 7, and 8 on how to enter the IP address. [ P.7-(13~19)]

IVReady to Connect:

7.The Wireless Display is now ready. Follow steps 20 through 22 on page 8 on how to establish connection with the computer. [ P.8-(20~22)]

Method 2

Configure from AdHoc mode to Infrastructure mode:

If the SSID of your Access Point is not "cfvdw07", you should first configure the Wireless Display with the computer in AdHoc mode. Secondly, use the "Wireless Display Setup Utility" to modify the Wireless Display to match the settings of the Access Point. Finally, change the wireless network adapter's profile to Infrastructure mode.

I Setup the Wireless Display in AdHoc Mode:

1.Follow the instructions on pages 3 through 8 on how to setup the display in AdHoc mode.

I Match the Display's Settings with the Access Point:

NOTE

Please have the information of your Access Point ready. The necessary information in- cludes the SSID of the Access Point, and it's WEP encryption key, if WEP is enabled.

Throughout this manual, an Access Point with

SSID = OfficeAP001

64 Bit WEP Key = A24BE4190C

is used as an example. Please match the settings accordingly with your Access Point.

11

Panasonic Wireless Display Configuration Manual

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Wireless Display Configuration Manual Introduction Table of Contents Install MeiWDS program First-time OperationIInstall the Serial Port Driver of the Wireless Display Software InstallationInstall Software Keyboard AdHoc Mode Configuration Get the Information You NeedTabs Create a Profile for the 802.11b Network Adapter This screen is a sample IInput the IP Address IVReady to Connect To disable the Fast User Switching function Infrastructure Mode Configuration Setup Infrastructure DirectlyMatch the Displays Settings with the Access Point Configure from AdHoc mode to Infrastructure modeSetup the Wireless Display in AdHoc Mode Panasonic Wireless Display Configuration Manual Infrastructure Mode Configuration ISetup the Wireless Network Adapter to Infrastructure Mode IVReady to Connect Using the MeiWDS Setup Utility To Disable the Password field on System TrayTo change the AES key of the host PC side To change the MeiWDS Setup Utility PasswordTo change the AES Encryption Key Lifetime To change the TCP/IP address Changing Wireless Display SettingsTo change the Wireless Displays Ssid ITo change MeiWDS System Tray Password IV To change the Profile NameTo change Wireless Display Setup Utilitys Password Using the Software Keyboard Auto MoveTransparent Uninstalling the MeiWDS program Uninstalling the SoftwareUninstalling the Software Keyboard IUninstalling the Wireless Display Serial Port driverUsage Precautions Limited USE License Agreement Term
Top Page Image Contents