Panasonic CF-VDW07HM Uninstalling the Software Keyboard, Uninstalling the MeiWDS program

Page 26

Uninstalling the Software

I Uninstalling the Software Keyboard:

1.Close the software keyboard.

2.Select [Start] - [Settings] - [Control Panel] - [Add/Remove Programs]. Select [Soft- ware Keyboard] - [Add/Remove]. Follow the on-screen instructions.

If [Locked File Detected] is displayed, please select [Reboot].

I Uninstalling the MeiWDS program:

3.Close the MeiWDS program by left clicking on the MeiWDS icon . Select [Exit MeiWDS].

4.Select [Start] - [Settings] - [Control Panel] - [Add/Remove Programs]. Select [MeiWDS] - [Add/Remove]. Follow the on-screen instructions.

IUninstalling the Wireless Display Serial Port driver:

6. Windows 2000

Select [Start] - [Settings] - [Control Panel] - [System] - [Device Manager] - [Ports (COM&LPT)]. Remove [WDSP COM Port (COMx)].

7. Windows XP

Select [Start] - [Settings] - [Control Panel] - [System] - [Device Manager] - [Ports (COM&LPT)]. Remove [WDSP COM Port (COMx)].

Limitation of the Wireless Display Serial Port

When the Wireless Display is not connected to the computer, the serial port of the Wire- less Display can not be used.

There are some serial devices and applications that will not work. This is because the serial port of the Wireless Display operates through a virtual serial port.

Devices or device drivers that start up and carry out port operation confirmation before connection establishment of the Wireless Display.

 

For example:

- Serial mouse devices

Non-virtual port applications

 

 

For example:

- MS-DOS applications

A modem

- 16-bit applications

 

Direct cable connection

 

In the above cases, the computer may freeze.

23

Panasonic Wireless Display Configuration Manual

Image 26
Contents Wireless Display Configuration Manual Introduction Table of Contents Install MeiWDS program First-time OperationIInstall the Serial Port Driver of the Wireless Display Software InstallationInstall Software Keyboard AdHoc Mode Configuration Get the Information You NeedTabs Create a Profile for the 802.11b Network Adapter This screen is a sample IInput the IP Address IVReady to Connect To disable the Fast User Switching function Infrastructure Mode Configuration Setup Infrastructure DirectlyMatch the Displays Settings with the Access Point Configure from AdHoc mode to Infrastructure modeSetup the Wireless Display in AdHoc Mode Panasonic Wireless Display Configuration Manual Infrastructure Mode Configuration ISetup the Wireless Network Adapter to Infrastructure Mode IVReady to Connect Using the MeiWDS Setup Utility To Disable the Password field on System TrayTo change the AES key of the host PC side To change the MeiWDS Setup Utility PasswordTo change the AES Encryption Key Lifetime To change the TCP/IP address Changing Wireless Display SettingsTo change the Wireless Displays Ssid ITo change MeiWDS System Tray Password IV To change the Profile NameTo change Wireless Display Setup Utilitys Password Using the Software Keyboard Auto MoveTransparent Uninstalling the MeiWDS program Uninstalling the SoftwareUninstalling the Software Keyboard IUninstalling the Wireless Display Serial Port driverUsage Precautions Limited USE License Agreement Term