To change the MeiWDS Setup Utility Password

Using the MeiWDS Setup Utility

B To change the MeiWDS Setup Utility Password:

1.The default supervisor password for the "MeiWDS Setup Utility" is "supervisor". To change the password, click the [Change Supervisor Password] button. The follow- ing window will appear.

This screen is a sample.

2.Enter the current password in the "Enter Current Password" field. Enter the new password in both of the "Enter New Password" and "Confirm New Password" fields. Click [OK] - [Next] - [Finish] to exit out of the utility.

C To change the AES Encryption Key Lifetime:

1.If AES encryption is enabled in "Wireless Display Setup Utility", the AES key length and AES key will be automatically updated in the "Key Length :" and [AES Key...] fields in the "MeiWDS Setup Utility".

Use the drop-down menu to select a different key lifetime. Click [Next] - [Finish]. The default AES key lifetime is [ 1 hour ].

D To change the AES key of the host PC side:

1.User can select [Disable], [128 bits], [192 bits] or [256 bits] AES encryption using the "Key Length :" drop-down menu.

2.Click the [AES Key...] button. the window as shown on the right will appear. Enter the AES key in this screen. Click [OK] - [OK] - [Finish].

NOTE

The Wireless Display's default setting is with AES en- cryption disabled. If the Wireless Display has been re- set to factory default. Please select [Disable] in the "Key Length :" field at D .

This screen is a sample.

17	Panasonic Wireless Display Configuration Manual