Usage Precautions

Do not maximize the MS-DOS screen. Once maximized, the connection with the Wireless Display is interrupted and the screen cannot be returned to its original size. In this case, press [ Alt ] + [ Enter ] on the computer.

If a computer establishes a connection with the Wireless Display while operating in a display mode other than those shown below. The display mode of the computer will automatically change to 800 x 600 (16-bit).

Resolution: 800 x 600 or 640 x 480

Color Mode: 16-bit color

If the connection with the Wireless Display is cut, the computer will return to its original display mode. In this case, the colors displayed on the screen may change if the color mode is changed.

If any changes are made to the display mode of the computer connecting to the Wireless Display, the connection will be cut.

The contents displayed on the Wireless Display may not be the same as what was displayed on the monitor/LCD of the computer.

Applications that use hardware-based drawing functions, etc., might not be displayed on the Wireless Display.

Some applications that perform frequent screen updating (such as video playback ap- plications) might not be shown on the Wireless Display or might be shown as static images.

Some 16-bit applications may not work properly.

The screen display may be unable to reflect a change in the cursor's shape.

When [Always On Top] setting is released, the software keyboard does not remain on top even if the character input box is selected (except during logon and password input).

When the LCD/external display is turned off by the [Turn off monitor] setting in [Control Panel] - [Power Management], the screen on the Wireless Display may remain displayed.

Communications may be affected when there is a high load on the computer.

The mouse cursor on the LCD of the computer may flicker when the computer is con- nected with the Wireless Display.

When removing the wireless LAN card after starting Windows, an error may occur.

Panasonic Wireless Display Configuration Manual