Infrastructure Mode Configuration
12.Click [Next]. The following window is displayed. Check "Enable Data Security," and enter the Access Point's WEP key.
13.Click [Next] - [Finish] to exit out of the profile setting. Please make sure to exit out of the network adapter configuration utility so the settings take effect immediately.
NOTE
Some adapters' Configuration Utilities can store more than one profile. Make sure the profile you just created is selected as default.
This screen is a sample.
IVReady to Connect:
14.The setting is complete. Restart the display, and the computer will now connect to the display through the Access Point.
15 | Panasonic Wireless Display Configuration Manual |