Panasonic TQBH0228, PT-ST10U, PT-ST10EA manual Projector control window, Detailed set up window

Using WebBrowser (cont.)

Projector control window

You can make various projector settings.

If you migrate from other page, click [Projector control] in the main menu (at the left of the window).

„	„
„ Basic control window	„ Advanced control window
On this window, click the [Basic control] tab.	On this window, click the [Advanced control] tab.

Connection with the projector may not be possible immediately after the power is turned on. In this case wait a bit and then make the connection again.

Detailed set up window

„„Network config

You can make detailed wired LAN settings.

11	Click [Detailed set up] → [Network config] in the
	menu.
22	Confirm the notes that appear on the screen and
	click [Next].

The settings window appears, showing the current settings.

•• To change the LAN settings, click [Change].

•• To return to the previous window, click [Back].

12