Panasonic TQBH0228, PT-ST10U, PT-ST10EA manual Network Dhcp, MAC Address

Page 8

Network setting of the projector (cont.)

STATUS

Your current settings appear.

Select [STATUS] in the NETWORK menu and press the [ENTER] button.

PICTURE

POSITION

LANGUAGE

DISPLAY OPTION

PROJECTOR SETUP

SECURITY NETWORK

WIRED LAN
NAME CHANGE
NETWORK CONTROL	ON
STATUS
INITIALIZE

SELECT

RETURN

ENTER

FUNCTION

The status of the following will appear.

NETWORK

DHCP	“ON” - “OFF”
IP ADDRESS	(See page 6)
SUBNETMASK	(See page 6)
DEFAULT GATEWAY	(See page 6)
MAC ADDRESS	—

MAC ADDRESS : “Glossary” (See page 18)

INITIALIZE

You can reset the network settings to the factory default settings of the projector.

11 Select [INITIALIZE] in the NETWORK menu and press the [ENTER] button.

PICTURE

POSITION

LANGUAGE

DISPLAY OPTION

PROJECTOR SETUP

SECURITY NETWORK

RETURN

SELECT

ENTER

WIRED LAN
NAME CHANGE
NETWORK CONTROL	ON
STATUS
INITIALIZE

The entry of the password is prompted if [PASSWORD] is turned [ON] in the “ SECURITY” menu.

22 Select [OK] with the [◄►] buttons and press the [ENTER] button.

	INITIALIZE
	INITIALIZE
OK	CANCEL
	RETURN

SELECT

ENTER

8

Image 8

Contents PT-ST10EA PT-ST10U Contents Request Regarding Security What you can doWEB control See PJLink SeeConnecting with Wired LAN Check your computerNecessary environment for computers to be connected Turn on the computerNetwork setting of the projector Press the Menu button on the projectorSelect Network with the buttons Press the Enter buttonWired LAN settings Default network settingsMenu’s Operating guidance Select OK with the buttons and press the Enter buttonSelect Network Control in the Network menu Select on or OFF with the buttonsNetwork Dhcp MAC Address„„Proxy server settings Using WebBrowserBefore using the WEB control Level and check the Enable checkbox under Active scripting Enter the User name and the Password Click OKWebBrowser starts up and the authentication window appears Open Internet Properties windowMonitor information window „ Network status„ If Failed appears DescriptionDetailed set up window Projector control windowClick Submit Complete the detailed settings and click Next„„Adjust clock „„E-mail set up „„Ping test„„If Normal is selected under Mail Contents „„If Simple is selected under Mail ContentsChange password window Switching Languages„„Authentication set up „„Command port set upCommand Control details Using PJLink protocol„„PJLink security authentication Glossary Trademarksヱㄏㄔㄐㄏㄊチヤㄐㄓㄑㄐㄓㄕㄊㄐㄏ