Panasonic PT-ST10EA, TQBH0228, PT-ST10U manual Glossary, Trademarks

Page 18

Glossary

Item

Descriptions

Page

LAN

Abbreviation for Local Area Network. This is a network with a relatively narrow range such as

4

 

inside a company.

 

DHCP

Abbreviation for Dynamic Host Configuration Protocol. This function automatically assigns IP

6

 

addresses to the connected equipment. If a device with the DHCP server function is present

 

 

within a LAN, it automatically assigns IP addresses to the connected equipment.

 

IP address

Internet Protocol (IP) is a protocol for distributing data, and the address corresponding to the

6

 

data distribution destination is called the IP address. The same IP address cannot be used

 

 

within the same LAN.

 

Subnetmask

This limits the range of the IP addresses assigned to computers in order to divide the network

6

 

into a number of sections during TCP/IP connection. The value used to divide the network at

 

 

this time is called the subnetmask.

 

Default Gateway

The devices that are used for different network standards from yours. Default Gateway

6

 

enables a connection with other network, by adjusting bilateral differences such as

 

 

communication protocols. If no gateway is specified for the IP address of access destination,

 

 

data will be sent to the host set as the default gateway.

 

MAC address

Each network adapter has its own ID No.

8

 

A discrete ID No. is assigned to each and every network adapter around the world. These

 

 

IDs are used to exchange data between adapters. These IDs are a combination of a discrete

 

 

number managed and assigned by the IEEE to each individual manufacturer and a unique

 

 

number assigned to each individual adapter by the manufacturer.

 

Trademarks

•• Microsoft ® and its logo are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

•• PJLink is a pending trademark in Japan, the United States and other countries and regions.

•• Other company names, product names or other names noted in this manual are trademarks or registered trademarks of the respective companies. Note that ® and TM marks are not indicated in the text of this manual.

Notes:

•• Unauthorized use or reproduction of part or all of this manual is strictly prohibited.

•• Panasonic cannot be held liable for any effects resulting from the use of this manual.

•• Panasonic reserves the right to revise this manual contents without notice.

18

Image 18
Contents PT-ST10EA PT-ST10U Contents WEB control See Request Regarding SecurityWhat you can do PJLink SeeNecessary environment for computers to be connected Connecting with Wired LANCheck your computer Turn on the computerSelect Network with the buttons Network setting of the projectorPress the Menu button on the projector Press the Enter buttonMenu’s Operating guidance Wired LAN settingsDefault network settings Select OK with the buttons and press the Enter buttonSelect Network Control in the Network menu Select on or OFF with the buttonsNetwork Dhcp MAC AddressUsing WebBrowser Before using the WEB control„„Proxy server settings WebBrowser starts up and the authentication window appears Level and check the Enable checkbox under Active scriptingEnter the User name and the Password Click OK Open Internet Properties window„ If Failed appears Monitor information window„ Network status DescriptionDetailed set up window Projector control windowComplete the detailed settings and click Next „„Adjust clockClick Submit „„E-mail set up „„Ping test „„If Normal is selected under Mail Contents „„If Simple is selected under Mail Contents„„Authentication set up Change password windowSwitching Languages „„Command port set upUsing PJLink protocol „„PJLink security authenticationCommand Control details Glossary Trademarksヱㄏㄔㄐㄏㄊチヤㄐㄓㄑㄐㄓㄕㄊㄐㄏ